Whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Even though this correction may seem to be simple thanks to the thumbwheel on your dashboard, a full correction is much more complex than this ordinary realignment, and in this content page, we will see how to adjust the low beam lights of your Mitsubishi Eclipse? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mitsubishi Eclipse.
Why set the low beam lights of your Mitsubishi Eclipse?
So let’s begin our content page with the benefit of adjusting the low beam lights of your Mitsubishi Eclipse. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and checking this setting, either because the low beams of your Mitsubishi Eclipse are not lighting up well, or because you have the sense that they are too low or too powerful is a good option .
Adjusting the low beam of your Mitsubishi Eclipse for safety is a good option.
First of all, the adjusting of the dipped headlights of an Mitsubishi Eclipse must be done for a elementary safety purpose. Regardless whether it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. In contrast, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mitsubishi Eclipse for legal reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mitsubishi Eclipse?
We will now go forward to the part that interests you the more in this content page, how to adjust the low beams of his Mitsubishi Eclipse? This setting may appear to be a bit complex, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mitsubishi Eclipse
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mitsubishi Eclipse
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Mitsubishi Eclipse (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Mitsubishi Eclipse is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Mitsubishi Eclipse, please go through our content page on this subject.
To find more tips on the Mitsubishi Eclipse, take a look at the Mitsubishi Eclipse category.
