Regardless whether you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this common manipulation, and in this article, we will find out how to adjust the low beam lights of your Kia Stronic? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Kia Stronic.
Why adjust the low beam lights of your Kia Stronic?
So let’s start our article with the advantage of adjusting the low beam lights of your Kia Stronic. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and verifying this setting, either because the low beams of your Kia Stronic are not illuminating well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Kia Stronic for security is a good plan.
First of all, the adjusting of the dipped headlights of an Kia Stronic must be done for a ordinary security cause. Whether it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Kia Stronic for legal justifications
Additionally to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Kia Stronic?
We will now go forward to the part that interests you the most in this article, how to adjust the low beams of his Kia Stronic? This setting may sound a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Kia Stronic
To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Kia Stronic
Once your motor vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Kia Stronic (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Kia Stronic is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Kia Stronic, please examine our article on this subject.
In the event that you have any additional questions about the Kia Stronic, do not hesitate to consult our Kia Stronic category.
