Whether you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this common modification, and in this content, we will discover how to adjust the low beam lights of your Jaguar F Pace? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Jaguar F Pace.
Why adjust the low beam lights of your Jaguar F Pace?
So let’s begin our content with the benefit of adjusting the low beam lights of your Jaguar F Pace. For a lot of people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Jaguar F Pace are not lighting up well, or because you have the feeling that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Jaguar F Pace for security is a wise decision.
To start, the adjusting of the dipped headlights of an Jaguar F Pace must be done for a simple security purpose. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Jaguar F Pace for legal justifications
Furthermore to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Jaguar F Pace?
We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Jaguar F Pace? This setting may sound a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Jaguar F Pace
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Jaguar F Pace
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Jaguar F Pace (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Jaguar F Pace is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Jaguar F Pace, please read our content on this subject.
If you need more tutorials on the Jaguar F Pace, go to our Jaguar F Pace category.
