It doesn’t matter if you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Even though this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this simple manipulation, and in this article, we will discover how to adjust the low beam lights of your Ford Taurus? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Taurus.
Why adjust the low beam lights of your Ford Taurus?
So let’s begin our article with the benefit of adjusting the low beam lights of your Ford Taurus. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking out this setting, either because the low beams of your Ford Taurus are not illuminating well, or because you have the sense that they are too weak or too strong is a good option .
Adjusting the low beam of your Ford Taurus for safety is a good option.
To begin, the adjusting of the dipped headlights of an Ford Taurus must be done for a ordinary safety purpose. Regardless it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Taurus for legal motives
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Taurus?
We will now go forward to the section that concerns you the most in this article, how to adjust the low beams of his Ford Taurus? This setting may appear to be a bit complicated, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Ford Taurus
First of all, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Taurus
Once your car is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford Taurus (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Ford Taurus is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford Taurus, please browse our article on this subject.
To get more tips on the Ford Taurus, take a look at the Ford Taurus category.
