It doesn’t matter if you feel you can’t see good enough during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Despite the fact this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic modification, and in this article, we will discover how to adjust the low beam lights of your Ford Expedition? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Expedition.
Why set the low beam lights of your Ford Expedition?
So let’s start our article with the benefit of adjusting the low beam lights of your Ford Expedition. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and looking at this setting, either because the low beams of your Ford Expedition are not illuminating well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Ford Expedition for security is a good plan.
To begin, the adjusting of the dipped headlights of an Ford Expedition must be done for a basic security purpose. Regardless it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Expedition for legal reasons
Furthermore to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Expedition?
We will now move on to the part that concerns you the more in this article, how to adjust the low beams of his Ford Expedition? This setting may sound a bit complicated, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Ford Expedition
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Expedition
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford Expedition (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Ford Expedition is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Ford Expedition, please browse our article on this subject.
To get more tips on the Ford Expedition, take a look at the Ford Expedition category.
