It doesn’t matter if you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Although this correction may look easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this simple modification, and in this article, we will discover how to adjust the low beam lights of your Ford Ecosport? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Ecosport.
Why adjust the low beam lights of your Ford Ecosport?
So let’s commence our article with the benefit of adjusting the low beam lights of your Ford Ecosport. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not automatically the case and examining this setting, either because the low beams of your Ford Ecosport are not illuminating well, or because you have the feeling that they are too weak or too strong is a good idea .
Adjusting the low beam of your Ford Ecosport for security is a good idea.
To begin, the adjusting of the dipped headlights of an Ford Ecosport must be done for a simple security cause. Whether it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Ford Ecosport for law justifications
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Ecosport?
We will now go forward to the section that concerns you the more in this article, how to adjust the low beams of his Ford Ecosport? This setting may appear a bit complicated, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Ford Ecosport
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Ecosport
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Ford Ecosport (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Ford Ecosport is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Ford Ecosport, please examine our article on this subject.
To get more tips on the Ford Ecosport, take a look at the Ford Ecosport category.
