Regardless you feel you can’t see as well during the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your automobile to blame – your low beams. Even though this correction may seem simple thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this basic manipulation, and in this article, we will discover how to adjust the low beam lights of your Dodge Ram? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Dodge Ram.
Why set the low beam lights of your Dodge Ram?
So let’s begin our article with the interest of adjusting the low beam lights of your Dodge Ram. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking this setting, either because the low beams of your Dodge Ram are not lighting up well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Dodge Ram for security is a good option.
To begin, the adjusting of the dipped headlights of an Dodge Ram must be done for a simple security purpose. Whether it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Dodge Ram for law reasons
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Dodge Ram?
We will now move on to the section that interests you the more in this article, how to adjust the low beams of his Dodge Ram? This setting may sound a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Dodge Ram
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Dodge Ram
Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Dodge Ram (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Dodge Ram is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Dodge Ram, please read our article on this subject.
If you have any further questions about the Dodge Ram, do not hesitate to consult our Dodge Ram category.
