Regardless you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Although this adjustment may seem to be simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this basic manipulation, and in this article content, we will see how to adjust the low beam lights of your Chrysler 300? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chrysler 300.
Why adjust the low beam lights of your Chrysler 300?
So let’s start our article content with the benefit of adjusting the low beam lights of your Chrysler 300. For most of us these lights are good enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and looking at this setting, either because the low beams of your Chrysler 300 are not illuminating well, or because you have the feeling that they are too low or too powerful is a good option .
Adjusting the low beam of your Chrysler 300 for security is a good option.
To begin, the adjusting of the dipped headlights of an Chrysler 300 must be done for a basic security reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Chrysler 300 for law justifications
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chrysler 300?
We will now go forward to the part that interests you the more in this article content, how to adjust the low beams of his Chrysler 300? This setting may appear to be a bit complex, but if you stick to the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Chrysler 300
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chrysler 300
Once your vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Chrysler 300 (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, check that the low beam setting of your Chrysler 300 is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Chrysler 300, please examine our article content on this subject.
If perhaps you have any additional questions about the Chrysler 300, do not hesitate to consult our Chrysler 300 category.
