It doesn’t matter if you feel you can’t see as well at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your vehicle to blame – your low beams. Despite the fact this correction may appear simple thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this simple manipulation, and in this content page, we will find out how to adjust the low beam lights of your Chevrolet Spark? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Spark.
Why set the low beam lights of your Chevrolet Spark?
So let’s begin our content page with the point of adjusting the low beam lights of your Chevrolet Spark. For the majority of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Chevrolet Spark are not lighting up well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Chevrolet Spark for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Chevrolet Spark must be done for a ordinary safety cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Spark for law justifications
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Spark?
We will now move on to the section that concerns you the most in this content page, how to adjust the low beams of his Chevrolet Spark? This setting may seem a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Chevrolet Spark
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Spark
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Chevrolet Spark (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, examine that the low beam setting of your Chevrolet Spark is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Chevrolet Spark, please examine our content page on this subject.
If you need more guides on the Chevrolet Spark, go to our Chevrolet Spark category.
