Regardless whether you feel you can’t see good enough through the night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Although this correction may look easy thanks to the thumbwheel on your dashboard, a full correction is much more technical than this simple realignment, and in this article content, we will discover how to adjust the low beam lights of your Chevrolet Corvette? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Corvette.
Why adjust the low beam lights of your Chevrolet Corvette?
So let’s begin our article content with the interest of adjusting the low beam lights of your Chevrolet Corvette. For a lot of people these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and looking at this setting, either because the low beams of your Chevrolet Corvette are not lighting up well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Chevrolet Corvette for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Chevrolet Corvette must be done for a basic safety reason. Whether it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. In contrast, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Corvette for law justifications
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Corvette?
We will now move on to the part that concerns you the more in this article content, how to adjust the low beams of his Chevrolet Corvette? This setting may sound a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Chevrolet Corvette
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Corvette
Once your vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Corvette (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Chevrolet Corvette is consistent on the road, do not be reluctant to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Chevrolet Corvette, please read our article content on this subject.
If you wish more guides on the Chevrolet Corvette, go to our Chevrolet Corvette category.
