Whether you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your car to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this ordinary realignment, and in this article, we will discover how to adjust the low beam lights of your Chevrolet Camaro? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Camaro.
Why set the low beam lights of your Chevrolet Camaro?
So let’s begin our article with the benefit of adjusting the low beam lights of your Chevrolet Camaro. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and examining this setting, either because the low beams of your Chevrolet Camaro are not lighting up well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Chevrolet Camaro for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Chevrolet Camaro must be done for a elementary security cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to predict a curve badly. In contrast, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Camaro for legal motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Camaro?
We will now move on to the part that concerns you the more in this article, how to adjust the low beams of his Chevrolet Camaro? This setting may sound a bit complicated, but if you follow the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Chevrolet Camaro
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Camaro
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Chevrolet Camaro (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Chevrolet Camaro is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Chevrolet Camaro, please browse our article on this subject.
If you want more tutorials on the Chevrolet Camaro, go to our Chevrolet Camaro category.
