Regardless whether you feel you can’t see good enough at night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Although this correction may seem to be easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this basic realignment, and in this article content, we will find out how to adjust the low beam lights of your Audi R8? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi R8.
Why adjust the low beam lights of your Audi R8?
So let’s start our article content with the benefit of adjusting the low beam lights of your Audi R8. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not necessarily the case and verifying this setting, either because the low beams of your Audi R8 are not illuminating well, or because you have the feeling that they are too low or too powerful is a good option .
Adjusting the low beam of your Audi R8 for safety is a good option.
Firstly, the adjusting of the dipped headlights of an Audi R8 must be done for a elementary safety reason. Whether it’s for you, or for the other drivers you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Audi R8 for legal reasons
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi R8?
We will now move on to the part that concerns you the most in this article content, how to adjust the low beams of his Audi R8? This setting may sound a bit complex, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Audi R8
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi R8
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Audi R8 (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the low beam setting of your Audi R8 is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Audi R8, please examine our article content on this subject.
To get more tips on the Audi R8, take a look at the Audi R8 category.
