Regardless you feel you can’t see good enough during the night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your automobile to blame – your low beams. Although this correction may appear simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this common realignment, and in this content, we will see how to adjust the low beam lights of your Audi Q8? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi Q8.
Why set the low beam lights of your Audi Q8?
So let’s commence our content with the point of adjusting the low beam lights of your Audi Q8. For most people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not always the case and verifying this setting, either because the low beams of your Audi Q8 are not lighting up well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Audi Q8 for security is a good idea.
First of all, the adjusting of the dipped headlights of an Audi Q8 must be done for a basic security reason. Regardless it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Audi Q8 for legal motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi Q8?
We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Audi Q8? This setting may appear to be a bit complex, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Audi Q8
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi Q8
Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Audi Q8 (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Audi Q8 is consistent on the road, do not be reluctant to check that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Audi Q8, please read our content on this subject.
If you wish more tutorials on the Audi Q8, go to our Audi Q8 category.
