It doesn’t matter if you feel you can’t see good enough during the night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this basic manipulation, and in this article content, we will find out how to adjust the low beam lights of your Audi E-Tron? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Audi E-Tron.
Why set the low beam lights of your Audi E-Tron?
So let’s begin our article content with the interest of adjusting the low beam lights of your Audi E-Tron. For most people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not always the case and verifying this setting, either because the low beams of your Audi E-Tron are not lighting up well, or because you have the feeling that they are too low or too powerful is a good option .
Adjusting the low beam of your Audi E-Tron for security is a good option.
To start, the adjusting of the dipped headlights of an Audi E-Tron must be done for a elementary security cause. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the road, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Audi E-Tron for legal justifications
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Audi E-Tron?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Audi E-Tron? This setting may appear a bit difficult, but if you follow the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Audi E-Tron
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Audi E-Tron
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Audi E-Tron (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Audi E-Tron is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Audi E-Tron, please read our article content on this subject.
In the event that you have any further questions about the Audi E-Tron, do not hesitate to consult our Audi E-Tron category.
