Whether it’s raining, foggy or snowing, most of the time, you appreciate having fog lights on your automobile. However, they can sometimes be out of adjustment or you may find that they are adjust too high or too low. That’s why we published this article content to demonstrate to you how to adjust the fog lights on your Mazda Mx5?. To get this done, first, we will see what is the reason of adjusting the fog lights of his vehicle, then, in an additional step, how to adjust the fog lights of your Mazda Mx5.
Why is it beneficial to adjust the front fog lights of your Mazda Mx5?
So we will begin our article content with the importance of setting the fog lights to Mazda Mx5. Nevertheless some fog lights are not set and are set at the factory, you have the possibility to change their setting so that they illuminate more or less high. This devices, which is not mandatory on an Mazda Mx5, permits you to greatly boost your visibility. However, it is exclusively permitted outside built-up areas in addition to the high beam, or in heavy rain, snow or fog.
Having an optimal setting of the fog lights of its Mazda Mx5 allows you not to blind and to maximise the gain in visibility that they give. Additionally, fog lights that are not effectively adjusted will inevitably disturb the drivers you pass and may increase the risk of an accident. It is therefore fundamental, both for you and other users, that you have your fog lights perfectly adjusted.
How to adjust the fog lights of your Mazda Mx5?
Now let’s go forward to the part you’re probably most interested in in this article content, namely how to adjust the fog lights on your Mazda Mx5? Now that you have understood the advantage of this adjustment, which may seem unimportant, let’s move on to the practical part.
Adjusting the fog lights is particularly easy, here are a few steps to follow to do it optimally:
- Empty your vehicle, verify the pressure of your tires and, set only one person (about 70kg) in the driver’s seat which will simulate an empty weight of your Mazda Mx5.
- Place your vehicle on a flat surface with a clean wall in front of you, ideally between 5 and 10 meters from it.
- Measure the distance from the ground to the top of your fog lamp (on your Mazda Mx5), write this distance on the wall in front of your car and mark it with a construction tape for example.
- Turn on the fog lights on your Mazda Mx5 and check that the beam of the lights is less than or equal to the mark you just marked on the wall.
- If they light higher than this trace, through the engine compartment you will have to use the adjustment screws to lower the lighting of your fog lights (these screws are generally placed above your fog lights, you should find them quickly, they will be more or less accessible according to the year and the options of your Mazda Mx5)
.
Now you know how to adjust the fog lights on your Mazda Mx5, don’t forget to check it from time to time if you have the impression that they are not anymore illuminating properly, don’t be reluctant to read our article content on how to adjust the low beam lights on Mazda Mx5 if you want to verify their lighting level.
In the event that you have any further questions about the Mazda Mx5, do not hesitate to consult our Mazda Mx5 category.
