Whether there are showers, foggy or snowing, generally, we are happy having fog lights on your vehicle. However, they can sometimes be out of adjustment or you may find that they are too high or too low. That’s explanation why we had written this article to explain to you how to adjust the fog lights on your Audi A2?. To accomplish this, first, we will see what is the meaning of adjusting the fog lights of his vehicle, then, in an extra step, how to adjust the fog lights of your Audi A2.
Why is it essential to adjust the front fog lights of your Audi A2?
So we will begin our article with the advantage of adjusting the fog lights to Audi A2. Even though some fog lights are not set and are set at the factory, you have the possibility to change their setting so that they illuminate more or less high. This devices, which is not obligatory on an Audi A2, enables you to greatly boost your visibility. However, it is only permitted outside built-up areas in addition to the high beam, or in heavy rain, snow or fog.
Having an optimal setting of the fog lights of its Audi A2 allows you not to blind and to increase the gain in visibility that they give. In addition, fog lights that are not correctly adjusted will undoubtedly affect the drivers you pass and may increase the risk of an accident. It is therefore important, both for you and other users, that you have your fog lights correctly adjusted.
How to adjust the fog lights of your Audi A2?
Now let’s go forward to the portion you’re almost certainly most interested in in this article, namely how to adjust the fog lights on your Audi A2? Now that you have realized the advantage of this adjustment, which may seem trivial, let’s move on to the practical part.
Adjusting the fog lights is particularly simple, here are a few simple steps to follow to do it optimally:
- Empty your vehicle, check the pressure of your tires and, set only one person (about 70kg) in the driver’s seat which will simulate an empty weight of your Audi A2.
- Place your vehicle on a flat area with a clean wall in front of you, ideally between 5 and 10 meters from it.
- Measure the distance from the ground to the top of your fog lamp (on your Audi A2), write this distance on the wall in front of your car and tag it with a construction tape for example.
- Switch on the fog lights on your Audi A2 and verify that the beam of the lights is less than or equal to the mark you just marked on the wall.
- If they illuminate higher than this trace, throughout the engine compartment you will have to use the adjustment screws to lower the lighting of your fog lights (these screws are generally located above your fog lights, you should find them quickly, they will be more or less accessible depending on the year and the options of your Audi A2)
.
Now you know how to adjust the fog lights on your Audi A2, don’t forget to check it from time to time if you have the impression that they are not anymore illuminating properly, don’t hesitate to read our article on how to adjust the low beam lights on Audi A2 if you want to check their lighting level.
Whenever you have any further questions about the Audi A2, do not hesitate to consult our Audi A2 category.
