In this article, we will try to assist you eliminate all the issues you might encounter around your car’s rims. And, principally, how to remove the rim of a Hyundai Kona? Whether you want to change a flat tire, or you want to change your tires, you will learn all the important informations reading this page. To accomplish this, we’ll see first how to remove the tire from a car rim, then, in a second part, how to remove a stuck rim on a Hyundai Kona, after that, how to remove flat rim from its Hyundai Kona to put the spare tire, and, at last, how to unblock the stuck bolts of a rim.
How to remove the tire from the rim of a Hyundai Kona?
So we start our content page by telling you how to change a car tire. You maybe
bought your tire on a website, however it is quite complicated to find professionals, car centers which will consent to install tires of your Hyundai Konapurchased elsewhere than in their business. The question of seeking to install them without any help is therefore more than respectable.
It is theoretically feasible with a lot of force and a crowbar to change the tires of your Hyundai Kona without help, however, even if you succed to take off both sidewalls of the tire, to loosen it, and to put the new tire back on, you won’t be able to balance the tire without the specific machine, if you don’t do it, your tires will loose a lot of lifetime. Take note that generally the installation and balancing costs only about twenty euros. If you want to buy tyres on websites to benefit of a preferential deal, take a good look, a good number of suppliers offer the fitting at a partner car centre totally free.
How to remove a rim stuck to its hub on a Hyundai Kona?
We now move on to the part you are certainly most curious about, namely, how to remove the rim of a Hyundai Kona stuck to its hub, and more specifically, the rather typical circumstance of a rim that hasn’t been removed for quite a long time and that because of rust stuck to the hub of your wheel. Indeed, it happens to a large number of road users to find themselves in this circumstance and not knowing where to start. This can be extremely annoying in the event that you have a flat tire and need to change the rim on your Hyundai Kona. Here are the different solutions available to you:
- If perhaps you have some with you, after lifting your car, and if possible on candles, and then extracting the rim nuts, use some anti-seize agent which you put in into the holes of the nuts and let it to work for about ten minutes. Following that, try again to remove the rim from your Hyundai Kona.
- Use power : Despite the fact it is almost never the best alternative, in this kind of circumstance you are facing solid pieces that do not risk much, and with the help of a mallet and a wooden wedge you can hit the side of the rim of your Hyundai Kona and this should certainly unlock it and allow you to remove it.
- Baste the junction between your rim of rust proof hub and wait a couple of hours before trying to unblock it again.
How to remove the rim of a Hyundai Kona to change its punctured wheel and replace it with the spare wheel?
We are now going to demonstrate you the most conventional technique but that everybody doesn’t know, how to remove the rim from its place if you have a puncture tyre and you desire to change it by the spare wheel? This process is not difficult, here are the different steps to respect:
- Stay out of traffic so as not to endanger yourself.
- Place your Hyundai Kona on a flat surface.
- Engage the hand brake and engage first gear.
- If perhaps you don’t know where the jack of your Hyundai Kona is, please read our article to learn you where is it located.
- Before lifting your car, unlock the rim bolts to ensure you don’t force your transmission once lifted
- Lift your Hyundai Kona with the jack and end unscrewing the rim nuts of your car.
- Take the flat rim off your Hyundai Kona.
- Placed on the spare wheel, put on the bolts, tighten them all by hand, in a balanced way before putting the car back on the road.
- End tightening the nuts with the socket wrench
How do you remove the stuck nuts from the rim of a Hyundai Kona?
To finish, it could happen that to remove the rim of your Hyundai Kona you have to deal with stuck nuts. In this case, you will have more or less the same solutions for the circumstance of a rim stuck against the wheel hub. The best solution will be to use anti-rust lubricant or anti-rust lubricant and let it work for a bit of time before unlocking the nuts. Another option, search for, some exist on batteries of electric shock wrenches they release a much higher torque than your arm plus the socket wrench, and will help you to unlock the nuts.
To find more tips on the Hyundai Kona, take a look at the Hyundai Kona category.
