On this page, we want to help you clear up all the issues you may face about your car’s rims. And, principally, how to remove the rim of a Fiat Panda 3? Whether you need to replace a flat wheel, or you need to change your tires, you will discover all the required informations reading this article. To do so, we’ll see first how to remove the tire from a car rim, then, in a second part, how to remove a stuck rim on a Fiat Panda 3, later, how to remove flat rim from its Fiat Panda 3 to put the spare tire, and, at last, how to unblock the stuck nuts of a rim.
How to remove the tire from the rim of a Fiat Panda 3?
So we start our article by explaining how to replace a car tire. You may have made a good deal by buying your tires on the internet, however it is quite complicated to manage to find professionals, car centers that will approve to mount tires of your Fiat Panda 3purchased elsewhere than in their business. The question of seeking to mount them without any help is therefore more than legitimate.
It is technically possible with a lot of force and a crowbar to replace the tires of your Fiat Panda 3 without help, however, regardless if you manage to take off both sidewalls of the tire, to loosen it, and to put the new tire back on, you won’t be able to balance the tire if you dont have the specific tools, if you don’t do it, your tires will loose a lot of lifetime. Take note that frequently the installation and balancing costs only about twenty euros. Whenever you desire to purchase tyres on the internet to benefit of a better selling price, take a good look, many of suppliers offer the fitting at a partner car centre cost-free.
How to remove a rim stuck to its hub on a Fiat Panda 3?
We now move on to the part you are certainly most interested in, namely, how to remove the rim of a Fiat Panda 3 stuck to its hub, and more precisely, the rather typical circumstance of a rim that hasn’t been removed for a long time and that due to rust stuck to the hub of your wheel. Indeed, it occurs to many road users to find themselves in this situation and not knowing where to start. This can be particularly annoying if it turns out you have a flat tire and need to replace the rim on your Fiat Panda 3. Here are the different solutions available to you:
- In the case you have some on hand, after jacking up your car, and when possible on candles, and then getting rid of the rim nuts, use some anti-seize agent which you inject right into the holes of the nuts and leave it to work for about ten minutes. After that, try again to remove the rim from your Fiat Panda 3.
- Use power : Although it is rarely the best solution, in this kind of circumstance you are facing solid pieces that do not risk much, and with the help of a mallet and a wooden wedge you can hit the side of the rim of your Fiat Panda 3 and this might unlock it and allow you to remove it.
- Baste the junction between your rim of rust proof hub and wait a few hours before trying to unblock it again.
How to remove the rim of a Fiat Panda 3 to replace its flat tire and replace it with the spare wheel?
We are at this moment going to explain you the most traditional procedure but that everybody doesn’t know, how to remove the rim from its place if you have a puncture tyre and you wish to change it by the spare wheel? This technique is not difficult, here are the several steps to respect:
- Stay out of traffic so as not to endanger yourself.
- Place your Fiat Panda 3 on a flat surface.
- Engage the parking brake and shift into first gear.
- In the event that you don’t know where the jack of your Fiat Panda 3 is, please read our article to learn you where is it located.
- Before lifting your car, unlock the rim nuts in order that you won’t give too much stress to your transmission before lifting it
- Lift up your Fiat Panda 3 with the jack and end unscrewing the rim nuts of your car.
- Remove the flat tire of your Fiat Panda 3.
- Put on the spare wheel, position the nuts, tighten them all by hand, in a balanced way before putting the car back on the road.
- End tightening the nuts with the socket wrench
How do you remove the stuck nuts from the rim of a Fiat Panda 3?
Last part of our article, it might happen that to remove the rim of your Fiat Panda 3 you have to deal with stuck nuts. In this instance, you will have approximately the same solutions for the circumstance of a rim stuck against the wheel hub. The best method will be to use anti-rust lubricant or anti-rust lubricant and allow it work for few moments before unlocking the nuts. Another possibility, try to look for, some exist on batteries of electric shock wrenches they release a much higher torque than your arm plus the socket wrench, and will help you to unlock the nuts.
If you want more tutorials on the Fiat Panda 3, go to our Fiat Panda 3 category.
