Car mirrors are one of the most essential safety features that you need to perpetually make certain are functioning properly, because it is your safety, the safety of other drivers and your finances because you can be fined if you have a malfunctioning side mirror. This is the circumstance that interests us on this page, you have dealt with a crash, one of your side mirrors is ruined and you are now wondering how to change a side mirror on your Toyota Sequoia? You are at the right place, we will detail all the procedures to help you change it properly. First of all, we’ll take a look at what attracts you on this site, how to change a complete side mirror on your Toyota Sequoia, and then how to change only the mirror glass.
How to change a complete side mirror on my Toyota Sequoia?
Let’s go, we start this guide with the part that probably interests you the most, how to change a side mirror on my Toyota Sequoia? This operation is very simple and you should be capable to do it yourself with a minimum amount of tooling. You will just need to take off the plastic cover inside your car’s cabin, it is in general clipped on the door. For power mirrors, make sure you unplug the power connector that you will see behind the cover. Finally, you will have to unscrew the screws that hold the mirror, commonly there are three, a simple screwdriver should do the trick to let you to complete this step of changing the side mirror of your Toyota Sequoia. Make sure to keep the mirror on the outside of your car when unscrewing the last screw, so that it does not fall out. At last to install your new side mirror, you will just have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish reposition the plastic cover. That’s it, you’ve just discovered how to change the side mirror of your Toyota Sequoia, you know now that it wasn’t that difficult.
How do you just change the window of the side mirror of my Toyota Sequoia?
If perhaps you just want to change the window of the side mirror of your Toyota Sequoia, you will first need to discern the sort of locking of your mirror. To achieve this, the quickest procedure is to take a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to change the side mirror glass of your Toyota Sequoia and it uses a tongue and groove system, you are fortunate people, it is the least complicated unit to take off. All you have to do is to use a plastic thing to take off the window “by force”.
- To put it back in place, do the same thing and push it back in place with force. To verify that it is perfectly situated, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Toyota Sequoia you will need to identify the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Make sure to keep the spring because it is possible that you have not one included it with your new window, replace it on your new window, dismantle the old one paying attention to the electric cables in case there is defrosting system
.
- Stick to the positioning guide (notch) and carefully push it into its housing so as not to break it. Examine that it is well situated by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can find the position of the swivel plate of the window to be changed on the side mirror of your Toyota Sequoia, in most cases it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you easier access to the device and using a screwdriver, rotate the system.
- If your mirror is built with a defrosting system, do the reverse process to reattach it and check that it is perfectly fixed.
If you want more guides on the Toyota Sequoia, go to our Toyota Sequoia category.
