Vehicle mirrors are one of the most vital security features that you have to constantly be sure are operating properly, because it is your safety, the safety of other road users and your budget because you can be fined if you have a malfunctioning side mirror. This is the case we will focus on in this article, you have experienced a crash, one of your side mirrors is damaged and you are now wondering how to change a side mirror on your Ram P/U? You are at the right spot, we will highlight all the steps to help you change it in the correct way. First of all, we’ll look at what attracts you here, how to change a complete side mirror on your Ram P/U, and then how to change only the mirror glass.
How to change a complete side mirror on my Ram P/U?
Let’s go, we commence this article with the part that likely concerns you the most, how to change a side mirror on my Ram P/U? This operation is quite simple and you should be able to do it without help with a minimum of tooling. You will just need to take out the plastic cover inside your car’s cabin, it is in most cases clipped on the door. For power mirrors, make sure to unplug the power connector that you will see at the rear of the cover. Finally, you will have to unscrew the screws that hold the mirror, generally there are three, a simple screwdriver should do the trick to let you to pass this step of changing the side mirror of your Ram P/U. Remember to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. At last to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and finally put back the plastic cover. That’s it, you’ve just discovered how to change the side mirror of your Ram P/U, you know now that it wasn’t that difficult.
How do you just change the window of the side mirror of my Ram P/U?
In case you only want to change the window of the side mirror of your Ram P/U, you will first of all need to determine the kind of locking of your mirror. To get this done, the easiest technique is to take a look at the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you want to change the side mirror glass of your Ram P/U and it uses a tongue and groove system, you are lucky, it is the least complicated unit to take out. All you have to do is to use a plastic thing to take out the window “by force”.
- To reposition it, do the same and push it back right into place with force. To check that it is well situated, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your Ram P/U you will have to locate the locking spring, turn the glass in the opposite way to give you access to it, disassemble it.
- Remember to keep the spring because it is possible that you have not one provided it with your new window, change it on your new window, dismantle the old one paying attention to the electric cables in case there is defrosting system
.
- Follow the positioning guide (notch) and gently push it into its housing so as not to break it. Verify that it is well situated by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can locate the location of the swivel plate of the window to be changed on the side mirror of your Ram P/U, generally it is at the bottom behind the window
.
- Turn the glass in the opposite way to give you much easier access to the device and using a screwdriver, rotate the system.
- If your mirror is equipped with a defrosting system, do the reverse operation to reattach it and check that it is well fixed.
If you have any further questions about the Ram P/U, do not hesitate to consult our Ram P/U category.
