Do you have the sense of a power drop without any reasonable reason, and all this happens in an unforeseen or usual way? Maybe it’s because your Dacia Logan is going to limp mode . In reality, the security mode can be activated on a motor vehicle for a number of reasons and the activation of this mode will set the engine’s behavior, sometimes causing a momentary or irreversible loss of power from your Dacia Logan until you deal with the trouble. Our writers wanted to compose this guide so that you can handle this concern, which is very embarrassing and can be dangerous for you and the rest of the car owners. In order to solve these problems, we will focus on the limp mode of your Dacia Logan. And secondly, what are the reasons why your Dacia Logan goes into security mode?
Dacia Logan THAT GOES TO limp mode: WHAT IS IT?
Let’s start our article with the definition of your Dacia Logan that goes to limp mode . You almost certainly won’t have any information about the fact that this mode has been turned on and you will simply experience the outcomes. In most cases the clues of a safety mode on your Dacia Logan will be that you will perceive an identifiable loss of power, you should not have the ability to exceed 3000 rpm which makes the use of your Dacia Logan more than difficult. In addition to the power loss, you may have an amber warning light on your speedometer which will appear on the screen to suggest that you go to your mechanic to deal with the trouble as quickly as possible. In reality, via your vehicle’s ECU and the various sensors that constantly monitor the procedure of your engine, your Dacia Logan that goes to safety is in reality a kind of electronic flange of your engine. However, you must be worried about this quickly because it almost certainly hides a concern that needs to be dealt with, nevertheless, especially over time, certain elements such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more quickly. In some scenarios, simply turning your Dacia Logan off and on again will be enough to turn off the security mode, in other cases the original concern must be solved to return to normal behaviour.
Why is my Dacia Logan going into limp mode?
Now we’re going to highlight the reasons why your Dacia Logan is on limp mode. First of all you can easily verify if this is the case by using your diagnostic plug and Dacia Loganreading the fault codes of your Dacia Logan. Please have a look at our dedicated article which reveals you how to use these tools and interpret the fault codes of your Dacia Logan yourself. You should find out a fault code displayed caused by an engine component. Depending on the finish of your motor vehicle the on-board computer will also tell you that you are in security mode. We will then see most of the parts that can produce your Dacia Logan safe.
- Turbo: A faulty turbo will instantly notify your computer and produce your motor vehicle safe.
- The EGR valve: If your car is ever used in a really quiet way or just for short trips at low speed, it will sometimes clog up and trigger the security mode to be activated.
- The Particle Filter: A part famous for the complications it triggers, in case your PAP is clogged, you will be subject to a safety shutdown of your Dacia Logan simply because your engine will not have the ability to properly exhaust the exhaust gases.
- The flow meter: Finally, the flow meter is the last of the known motives of an Dacia Logan going into security. In fact, if it doesn’t manage the air/fuel mixture properly, your ECU will know the problem instantly.
In the event you have any other worries or questions about your motor vehicle, you can certainly discover the remedy in our Dacia Logan Guidebook.
If perhaps you have any further questions about the Dacia Logan, do not hesitate to consult our Dacia Logan category.
