Certain components of your car are fundamental to its correct operation, and to go further, fundamental to your security and that of other users. Your braking system is one of them, and if there’s one thing that must be in good working conditions, it’s this one. When you start to have brake complications you need to deal with it right away, that’s why our team has written this content page on brake fluid leaks on Alfa Romeo Mito to help you address this difficulty in the right technique and handle it quickly. To achieve this, we will first discover the purpose of brake fluid, then, what causes a brake fluid leak on your Alfa Romeo Mito , and to finish, how to remedy such a leak.

brake-fluid-leak-alfa-romeo-mito

What is the purpose of brake fluid on a Alfa Romeo Mito?

So we start our content page by quickly detailing the purpose of this famous brake fluid in the braking system of your Alfa Romeo Mito. To understand, a brake system functions with a closed hydraulic circuit, that is to say that you will have rigid hoses filled with brake fluid that are pressurized by the master cylinder, and when you press your brake pedal, your brake fluid will be pressurized and will actuate your brake calipers so that they pinch the brake pads on your discs. It is therefore essential that you always have the right level of brake fluid on your Alfa Romeo Mito, if you don’t know how to perform this manipulation, seek advice from our content page on this subject.

Motives of a brake fluid leak on your Alfa Romeo Mito

We now move on to a more necessary part to help you understand why you have a brake fluid leak on your Alfa Romeo Mito .

What causes a brake fluid leak on a Alfa Romeo Mito?

First, we’ll show you the different possible sources of the leak of your Alfa Romeo Mito. Here are the ones below:

  • A damaged brake hose: It’s one of the most common causes, one of the brake hoses has been cut and you lose brake fluid and pressure through this hole.
  • A defective master cylinder on Alfa Romeo Mito can lead to leaks on its different entries or exits.
  • In most cases this comes about when a brake drain has been done recently, and it is generally not tightened properly.
  • Wheel cylinder: Just present on drum brakes, this part can leak and trigger an imbalance in the braking.

How to notice a brake fluid leak on Alfa Romeo Mito?

We will now give you the different recommendations and symptoms to interpret to verify that you have a brake fluid leak on your Alfa Romeo Mito , discover them below:

  • If the ABS warning light of your Alfa Romeo Mito is on , you have to verify directly the condition of your circuit, do not hesitate to seek advice from our dedicated content page to have all the procedures to perform.
  • If your Alfa Romeo Mito pulls to the left or right when you brake you may have a brake fluid leak.
  • This is one of the most apparent indications, if you feel that your pedal is much much easier to press down and goes up more slowly, it is very likely that you have a loss of pressure in your brake system.
  • More logical, but if you discover brake fluid on one of these components you are bound to have a leak since this circuit is supposed to be closed.

How to fix a brake fluid leak on Alfa Romeo Mito?

The only remedy when you encounter a brake fluid leak on your Alfa Romeo Mito is to go to your mechanic. If it is light, verify your level and drive carefully to the mechanic, if it is too big don’t drive and have your motor vehicle towed. A general breakdown of your brake system will lead to an accident. You can, however, make a few regular checks to limit the risks:

  • verify the brake fluid level repeatedly.
  • Purge your brakes every two years or 40, 000 miles.
  • Replace the brake fluid if you feel the brakes on your Alfa Romeo Mito become “soft”.

If you have any further questions about the Alfa Romeo Mito, do not hesitate to consult our Alfa Romeo Mito category.