Some components of your Mazda CX 9 are fundamental, if for your security or that of other individuals, ensuring that all these components are in good working order is part of your legal and moral duties. In this article , we are going to focus on one of these components, your vehicle’s signals, the turn signals. In truth, you may have a blinker problem on Mazda CX 9, whether it’s because they’re burned out, they make an unfamiliar noise, or whatever, we’re going to try to address your concerns today so that you can get back on the road with peacefulness. To achieve this, we will discover one after the other different blinker problems on Mazda CX 9 and the answers to remedy them.


The various blinker problems on Mazda CX 9 and their solutions

We will therefore produce our content depending to the type of blinker problem you are facing on your Mazda CX 9. You should know that the turn signals are the only components that allow other road users to know your changes in direction, so it is important that they are in good working order.

Blinker problem that does not flash on one side on Mazda CX 9

If you are in the case where, when you turn on your blinkers on the left or right side of your Mazda CX 9 they do not light up while on the other side everything works properly. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to examine the condition of your blinker bulbs, take a look at our content on changing the indicator bulb on Mazda CX 9 if you don’t know how to do this operation. Keep in mind to examine the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after checking the bulbs of the blinkers of your Mazda CX 9 are not burnt out, you will have to take off the comodo of your turn indicators to examine that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Mazda CX 9

Second blinker problem you may encounter on Mazda CX 9, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical problem that is the trigger of the turn signal troubles. You will have to examine the turn signal fuse on your Mazda CX 9, please go to our content to locate it very easily. In most situations your fuse is blown, in any other case it could be the fuse relay that is producing the problem. Finally, if your fuses and relays are in good condition, examine that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Mazda CX 9

Now the most regular case of blinker problems on Mazda CX 9, only one of your blinkers doesn’t work. In this scenario, the problem is in general basic to correct and a change of a burnt-out bulb will be enough to solve it. If this is not enough, remember to verify the state of the bulb socket which could trigger a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up atypically on Mazda CX 9

To finish , the last problem you may encounter is that the turn indicators of your Mazda CX 9 make a different noise when you turn them on or that they work randomly. Two situations, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is damaged.


As seen previously in this article, flashing lights are necessary security components on your Mazda CX 9, you must constantly make certain that they are functioning properly. No matter what the reason of the flasher problem is, it must be cured as quickly as possible because accidents happen fairly quickly and whether it’s a simple fender bender or something more severe, you are bound to be at fault.

To find more tips on the Mazda CX 9, take a look at the Mazda CX 9 category.