Certain parts of your Jeep Liberty are fundamental, whether for your safety or that of other users, making certain all these parts are operating properly is part of your legal and moral obligations. Today, we are going to talk about one of these parts, your vehicle’s signals, the turn signals. Indeed, you may have a blinker problem on Jeep Liberty, whether it’s because they’re burned out, they produce a strange noise, or whatever, we’re going to try to treat your concerns today so that you can get back on the road with secure feeling. To accomplish this, we will discover one by one various blinker trouble on Jeep Liberty and the solutions to get rid of them.


The various blinker problems on Jeep Liberty and their solutions

We will consequently compose our article according to the form of blinker trouble you are being confronted with on your Jeep Liberty. You should know that the turn signals are the only parts that allow other road users to know your changes in direction, so it is necessary that they are in good working order.

Blinker problem that does not flash on one side on Jeep Liberty

If you are in the case in which, when you turn on your blinkers on the left or right side of your Jeep Liberty they do not light up while on the other side everything operates normally. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, see our article on changing the indicator bulb on Jeep Liberty if you don’t know how to do this operation. Remember to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after examining the bulbs of the blinkers of your Jeep Liberty are not burnt out, you will have to take off the comodo of your turn indicators to verify that there is no false contact when you switch it on the troublesome side.

Problem no blinker lights on Jeep Liberty

Second blinker problem you may encounter on Jeep Liberty, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical trouble that is the cause of the turn signal incapacity. You will have to verify the turn signal fuse on your Jeep Liberty, please check out our article to locate it very easily. Most frequently your fuse is blown, in any other case it could be the fuse relay that is producing the trouble. Finally, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Jeep Liberty

Now the most common case of blinker problems on Jeep Liberty, only one of your blinkers doesn’t work. In this scenario, the trouble is in general easy to solve and a change of a burnt-out bulb will be enough to solve it. If this is not enough, keep in mind to verify the condition of the bulb socket which could generate a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up abnormally on Jeep Liberty

To conclude, the last trouble you may encounter is that the turn indicators of your Jeep Liberty make a different noise when you turn them on or that they work abnormally. Two situations, or you have a short circuit somewhere in your electrical installation or, your turn indicator unit is damaged.


As seen before in this article, flashing lights are important safety parts on your Jeep Liberty, you must all the time make sure that they are operating correctly. No matter what the cause of the flasher trouble is, it must be cured as soon as possible because accidents happen very fast and whether it’s a simple fender bender or something more serious, you are bound to be at fault.

To find more tips on the Jeep Liberty, take a look at the Jeep Liberty category.