Specific elements of your Jeep Compass are essential, if for your safety or that of other individuals, making sure that all these elements are operating properly is part of your legal and moral obligations. In this article , we are going to discuss one of these elements, your vehicle’s turn indicators, the turn signals. Indeed, you may have a blinker problem on Jeep Compass, whether it’s because they’re burned out, they make an unusual noise, or whatever, we’re going to try to solve your worries today so that you can get back on the road with comfort. To do this, we will discover one by one different blinker problems on Jeep Compass and the solutions to resolve them.
The various blinker problems on Jeep Compass and their solutions
We will so produce our article depending to the sort of blinker problem you are struggling with on your Jeep Compass. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is imperative that they are in good working order.
Blinker problem that does not flash on one side on Jeep Compass
If you are in the scenario where, when you turn on your blinkers on the left or right side of your Jeep Compass they do not light up while on the other side everything works properly. In this scenario it may be that both of your blinker bulbs are burnt out, first step for you to verify the state of your blinker bulbs, check out our article on changing the indicator bulb on Jeep Compass if you don’t know how to do this operation. Keep in mind to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after verifying the bulbs of the blinkers of your Jeep Compass are not burnt out, you will have to remove the comodo of your turn indicators to verify that there is no false contact when you switch it on the problematic side.
Problem no blinker lights on Jeep Compass
Second blinker problem you may encounter on Jeep Compass, none of your flashers light up. If you are in this scenario there is a good chance that it is an electrical problem that is the cause of the turn signal incapacity. You will have to verify the turn signal fuse on your Jeep Compass, please have a look at our article to locate it easily. In most situations your fuse is blown, in any other case it could be the fuse relay that is causing the problem. At last, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.
Problem a blinker doesn’t light up on Jeep Compass
Now the most common case of blinker problems on Jeep Compass, only one of your blinkers doesn’t work. In this scenario, the problem is in general easy to solve and a change of a burnt-out bulb will be enough to solve it. If this is not enough, keep in mind to check the condition of the bulb socket which could trigger a bad electrical contact and thus prevent the bulb from lighting up.
Blinker problem that lights up abnormally on Jeep Compass
Finally, the last problem you may encounter is that the turn indicators of your Jeep Compass make a different noise when you turn them on or that they work abnormally. Two cases, either you have a short circuit somewhere in your electrical installation or, your turn indicator unit is malfunctioning.
Conclusion
As seen earlier in this post, flashing lights are essential safety elements on your Jeep Compass, you must constantly be sure that they are working properly. No matter what the reason of the flasher problem is, it must be treated as soon as possible because accidents happen fairly quickly and whether it’s a simple fender bender or something more serious, you are bound to be at fault.
Whenever you have any further questions about the Jeep Compass, do not hesitate to consult our Jeep Compass category.
