Certain elements of your Hyundai Tucson are vital, regardless for your security or that of other individuals, ensuring that all these elements are in good working order is part of your legal and moral duties. Today, we are going to talk about one of these elements, your vehicle’s signals, the turn signals. In truth, you may have a blinker problem on Hyundai Tucson, whether it’s because they’re burned out, they produce a strange noise, or whatever, we’re going to try to address your worries today so that you can get back on the road with assurance. To accomplish this, we will discover one after the other several blinker concerns on Hyundai Tucson and the solutions to solve them.


The various blinker problems on Hyundai Tucson and their solutions

We will therefore write our article according to the kind of blinker trouble you are struggling with on your Hyundai Tucson. You should know that the turn signals are the only elements that allow other road users to know your changes in direction, so it is fundamental that they are in good working order.

Blinker problem that does not flash on one side on Hyundai Tucson

If you are in the scenario in which, when you turn on your blinkers on the left or right side of your Hyundai Tucson they do not light up while on the other side everything works normally. In this situation it may be that both of your blinker bulbs are burnt out, first step for you to verify the condition of your blinker bulbs, take a look at our article on changing the indicator bulb on Hyundai Tucson if you don’t know how to do this operation. Keep in mind to verify the condition of the bulb socket, it may be oxidized and the electrical contact may be bad. If after examining the bulbs of the blinkers of your Hyundai Tucson are not burnt out, you will have to take off the comodo of your turn indicators to verify that there is no false contact when you switch it on the problematic side.

Problem no blinker lights on Hyundai Tucson

Second blinker problem you may encounter on Hyundai Tucson, none of your flashers light up. If you are in this situation there is a good chance that it is an electrical trouble that is the trigger of the turn signal troubles. You will have to verify the turn signal fuse on your Hyundai Tucson, please check out our article to locate it quickly. In many instances your fuse is blown, otherwise it could be the fuse relay that is leading to the trouble. Finally, if your fuses and relays are in good condition, verify that the flasher comodo is well powered.

Problem a blinker doesn’t light up on Hyundai Tucson

Now the most general case of blinker problems on Hyundai Tucson, only one of your blinkers doesn’t work. In this situation, the trouble is usually basic to correct and a change of a burnt-out bulb will be enough to solve it. If this is not enough, bear in mind to verify the state of the bulb socket which could trigger a bad electrical contact and thus prevent the bulb from lighting up.

Blinker problem that lights up atypically on Hyundai Tucson

To finish , the last trouble you may encounter is that the turn indicators of your Hyundai Tucson make a different noise when you turn them on or that they work abnormally. Two cases, either you have a short circuit somewhere in your electrical installation or, your turn indicator unit is damaged.


As seen previously in this post, flashing lights are very important security elements on your Hyundai Tucson, you must all the time make certain that they are functioning effectively. No matter what the reason of the flasher trouble is, it must be treated as soon as possible because accidents happen very fast and whether it’s a simple fender bender or something more significant, you are bound to be at fault.

To discover more tips on the Hyundai Tucson, take a look at the Hyundai Tucson category.