Facing problems on your vehicle is especially frustrating, furthermore the economic burden that these complications signify, one must also add the time lost with a non-functional Hyundai Santa Fe and the time spent to diagnose and remedy the breakdown. However, some problems are less serious than others, which is not to say that they do not stress us. In this article we are going to look into a problem that can occur to most of us, having vibrations at acceleration on Hyundai Santa Fe. This problem can occasionally be difficult to perceive but it must be looked after. We will consequently begin our article with the origins of these vibrations on Hyundai Santa Fe, then, with the answers you have to reduce or stop these tremors.

acceleration-vibrations-hyundai-santa-fe

Why does my Hyundai Santa Fe produce vibrations when accelerating?

So let’s begin our article with the origins of this type of problem on your car. You should already know that an engine, specifically if it is old or if it has been driven a lot, can naturally vibrate without being a problem behind it. Large diesel engines, specifically those with a lot of torque, can trigger this form of impression, both at idle and when accelerating.

I feel vibrations on my Hyundai Santa Fe only when accelerating

Let’s take the most interesting case for us in this article. The simple fact that you suffer trembling on your Hyundai Santa Fe during your acceleration periods, in this circumstance you will have to check the condition of several elements because a good number of elements can be at the origin of these vibrations and regardless if you are unfortunate a mix of several of them may also be possible, here is the list of components that can be involved.

  • Turbo: If the turbo of your Hyundai Santa Fe is defective, it may trigger vibrations that you will suffer when you accelerate at the moment it is turned on.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disturb the performance of your turbo and deliver vibrations that you may come to feel at the time of acceleration of your Hyundai Santa Fe.

    • .

  • If the turbo is punctured or harmed, the end result will be alike, the power supply of your turbo will be troubled and its performance too. Be sure to visually verify their state.

I’m experiencing vibrations on my Hyundai Santa Fe at acceleration and deceleration

We will now look into the scenario where you come to feel vibrations on your Hyundai Santa Fe when you are accelerating but also when you are idling. If you only come to feel vibrations when you are idling on your Hyundai Santa Fe, please have a look at our article dedicated to this problem to solve your problem. If, however, you realize that your Hyundai Santa Fe vibrates when accelerating but also when it is stopped, here is the list of things to verify:

  • EGR valve: In actual fact this valve which controls the return of exhaust gases for pollution standards can become dirty and disturb the evacuation of exhaust gases which can trigger Hyundai Santa Fe vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will discharge the wrong amount of mixture and thus prevent your engine block from working correctly, it is even possible that one or more of your cylinders are not running properly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass properly and therefore disturb the performance of your Hyundai Santa Fe, up to the point of generating vibrations during acceleration.

Here are the most important motives of a Hyundai Santa Fe that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Hyundai Santa Fe? What can I do?

Finally, in this last section, we will tell you the answers available to you to cure these tremors on your car when you accelerate. Here is the best attitude to adopt according to the part that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Hyundai Santa Fe, it will be good for you to control all the components attached to it because changing a complete turbo is a big budget and generally the problem does not come precisely from the turbo. So make sure to check out your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Hyundai Santa Fe to your garage.
  • EGR valve: The EGR valve has the benefit that it is more often than not easy to access and easy to take apart/clean. You can always look into it and clean it, for this see our article on cleaning the EGR valve of an Hyundai Santa Fe.
  • Injectors: Injectors are very fragile components and a few harmful particles may be enough to disturb their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a professional.
  • Fuel Filter: If it is the fuel filter, only change it. A fuel filter doesn’t clean itself, so if it is clogged you will basically have to replace it with a new one.

Now you have all the information you need to discover the cause of the vibrations at acceleration on your Hyundai Santa Fe. If you don’t feel able to execute certain procedures don’t hesitate to go to your repair shop.

If perhaps you have any additional questions about the Hyundai Santa Fe, do not hesitate to consult our Hyundai Santa Fe category.