Encountering problems on your vehicle is really irritating, moreover the financial side that these complications represent, one must also add the time lost with a non-functional Ford Ranger and the time spent to establish and remedy the malfunction. On the other hand, some problems are less serious than others, which is not to say that they do not stress us. Today we are going to look into a trouble that can affect everyone, perceiving vibrations at acceleration on Ford Ranger. This trouble can sometimes be hard to perceive but it must be looked after. We will therefore start our article content with the origins of these vibrations on Ford Ranger, then, with the solutions you have to reduce or stop these tremors.


Why does my Ford Ranger produce vibrations when accelerating?

So let’s start our article content with the origins of this form of trouble on your car. You should already know that an engine, especially if it is ancient or if it has been driven quite a bit, can naturally vibrate without being a trouble behind it. Large diesel engines, especially those with a lot of torque, can generate this form of discomfort, both at idle and when accelerating.

I feel vibrations on my Ford Ranger only when accelerating

Let’s take the most interesting case for us in this article content. The fact that you undergo trembling on your Ford Ranger during your acceleration periods, in this scenario you will have to examine the state of several parts because several of elements can be at the source of these vibrations and even if you are unfortunate a mix of several of them may also be possible, here is the list of parts that can be concerned.

  • Turbo: If the turbo of your Ford Ranger is faulty, it may generate vibrations that you will feel when you accelerate at the moment it is turned on.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may affect the performance of your turbo and make vibrations that you may come to feel at the time of acceleration of your Ford Ranger.
  • .

  • If the turbo is punctured or injured, the consequence will be the same, the power supply of your turbo will be troubled and its performance too. Remember to visually check their state.

I’m experiencing vibrations on my Ford Ranger at acceleration and deceleration

We will now look into the situation where you come to feel vibrations on your Ford Ranger when you are accelerating but also when you are idling. If you only come to feel vibrations when you are idling on your Ford Ranger, please seek advice from our article content focused upon this trouble to resolve your problem. If, on the other hand, you detect that your Ford Ranger vibrates when accelerating but also when it is stopped, here is the list of components to check:

  • EGR valve: In truth this valve which manages the return of exhaust gases for pollution standards can become dirty and disrupt the evacuation of exhaust gases which can generate Ford Ranger vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that regulating the fuel/air mixture flow may be dirty or damaged, which will generate the wrong amount of mixture and thus prevent your engine block from working effectively, it is even possible that one or more of your cylinders are not running correctly.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass correctly and therefore disrupt the performance of your Ford Ranger, up to the point of causing vibrations during acceleration.

Here are the main motives of a Ford Ranger that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Ford Ranger? What can I do?

To conclude, in this last part, we will give you the possibilities available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt based on the component that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Ford Ranger, it will be good for you to control all the parts linked to it because changing a complete turbo is a big budget and generally the trouble does not come exclusively from the turbo. So make sure you take a look at your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Ford Ranger to your garage area.
  • EGR valve: The EGR valve has the advantage that it is more often than not easy to access and easy to disassemble/clean. You can always take a look at it and clean it, for this see our article content on cleaning the EGR valve of an Ford Ranger.
  • Injectors: Injectors are very fragile parts and a few harmful particles may be enough to disrupt their performance. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a expert.
  • Fuel Filter: If it is the fuel filter, just replace it. A fuel filter doesn’t clean itself, so if it is clogged you will only have to replace it with a new one.

Now you have all the info you need to find the cause of the vibrations at acceleration on your Ford Ranger. If you don’t feel able to execute certain operations don’t hesitate to go to your motor mechanic.

In the event that you have any additional questions about the Ford Ranger, do not hesitate to consult our Ford Ranger category.