Being the target of recurring problems on your automobile is especially bothersome, furthermore the economic burden that these concerns represent, one must also add the time lost with a non-operational Acura TSX and the time spent to detect and repair the breakdown. On the other hand, some problems are less severe than others, which is not to say that they do not worry us. Today we are going to look into a issue that can affect everyone, feeling vibrations at acceleration on Acura TSX. This issue can occasionally be complex to perceive but it must be dealt with. We will consequently start our article with the sources of these vibrations on Acura TSX, then, with the solutions you have to reduce or stop these tremors.

acceleration-vibrations-acura-tsx

Why does my Acura TSX make vibrations when accelerating?

So let’s start our article with the sources of this kind of issue on your car. You should already know that an engine, especially if it is ancient or if it has been driven quite a bit, can naturally vibrate without being a issue behind it. Large diesel engines, especially those with a lot of torque, can bring about this kind of discomfort, both at idle and when accelerating.

I feel vibrations on my Acura TSX only when accelerating

Let’s take the most interesting case for us in this article. The fact that you suffer trembling on your Acura TSX during your acceleration periods, in this situation you will have to verify the condition of some elements because several of elements can be at the beginning of these vibrations and even if you are unlucky a mix of several of them may also be possible, here is the list of auto parts that can be involved.

  • Turbo: If the turbo of your Acura TSX is faulty, it may bring about vibrations that you will come to feel when you accelerate at the moment it is running.
  • The turbo pressure sensor: This sensor will control the pressure exerted in the turbo of your car, if it fails it may disturb the performance of your turbo and make vibrations that you may feel at the time of acceleration of your Acura TSX.

    • .

  • If the turbo is punctured or damaged, the consequence will be the same, the power supply of your turbo will be disrupted and its performance too. Make sure you visually verify their condition.

I’m feeling vibrations on my Acura TSX at acceleration and deceleration

We will now look into the scenario where you feel vibrations on your Acura TSX when you are accelerating but also when you are idling. If you only feel vibrations when you are idling on your Acura TSX, please have a look at our article focused upon this issue to resolve your problem. If, alternatively, you identify that your Acura TSX vibrates when accelerating but also when it is stopped, here is the list of items to verify:

  • EGR valve: In truth this valve which controls the return of exhaust gases for pollution standards can become dirty and affect the evacuation of exhaust gases which can bring about Acura TSX vibrates when accelerating but also when stopped.
  • Injectors: Your injectors that control the fuel/air mixture flow may be dirty or damaged, which will release the wrong amount of mixture and thus prevent your engine block from working properly, it is even possible that one or more of your cylinders are not running effectively.
  • Fuel Filter: Like the injectors, if the filter is clogged it will not let the fuel pass effectively and therefore affect the operation of your Acura TSX, up to the point of leading to vibrations during acceleration.

Here are the main triggers of a Acura TSX that vibrates at acceleration

What can I do to stop the vibration when I accelerate on my Acura TSX? What can I do?

To conclude, in this last section, we will tell you the possibilities available to you to handle these tremors on your car when you accelerate. Here is the best attitude to adopt in accordance with the component that is involved:

  • Turbo: If your turbo starts all these vibrations when you accelerate your Acura TSX, it will be good for you to control all the auto parts connected to it because changing a complete turbo is a big budget and in most cases the issue does not come precisely from the turbo. So make sure examine your turbo pressure sensor, your flowmeter, the EGR valve and the hoses of your turbo. Otherwise take your Acura TSX to your workshop.
  • EGR valve: The EGR valve has the benefit that it is often times easy to access and easy to disassemble/clean. You can always look into it and clean it, for this see our article on cleaning the EGR valve of an Acura TSX.
  • Injectors: Injectors are very delicate auto parts and a few impurities may be enough to affect their operation. Use a fuel additive to simply clean the injectors, if this is not enough you will have to go to a specialist.
  • Fuel Filter: If it is the fuel filter, simply replace it. A fuel filter doesn’t clean itself, so if it is clogged you will basically have to replace it with a new one.

Now you have all the information you need to locate the cause of the vibrations at acceleration on your Acura TSX. If you don’t feel able to complete certain procedures don’t hesitate to go to your repair shop.

If you wish more tutorials on the Acura TSX, go to our Acura TSX category.