Watching your vehicle is essential nowadays, in fact, if you do not do the minimum service of it, or if you do not take into account symptoms of abnormality, you highly risk to observe your car withering away. This is specifically the theme we are gonna talk about today, one of the symptoms that most disturbs drivers is the ABS warning light on Volkswagen Crafter 2. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second what you can do if the ABS light is on Volkswagen Crafter 2?.
What does the ABS light on Volkswagen Crafter 2 signify?
We will begin our paper with the definition of an ABS warning light on Volkswagen Crafter 2, to do this, in first, we will discover what an ABS is, and next, why the ABS light on your car lights up.
What is the ABS on Volkswagen Crafter 2?
To begin with, it is important to explain to you what the ABS of your Volkswagen Crafter 2 is utilized for so that you can understand the rest of this article. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The goal of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Volkswagen Crafter 2 is consisting of different parts, here they are:
- Speed sensors on each wheel, which will evaluate if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Volkswagen Crafter 2
.
The fact is, you can very easily feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the behaviour that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on Volkswagen Crafter 2
Now we move on to the section that you are certainly more curious about, meaning of an ABS warning light on a Volkswagen Crafter 2? To begin with, it is an orange light, so if it is on it denotes that your ABS system is faulty. You should be informed that whenever the ABS warning light is on, the ABS will be put into security mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Volkswagen Crafter 2 can point:
- It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to verify it.
- A malfunctioning ABS sensor: A breakdown of one of them triggers the ABS light on your Volkswagen Crafter 2 to turn on
- The ABS hydraulic block of your Volkswagen Crafter 2: If it is faulty it is possible that the indicator light will come on and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will obviously turn on.
What if the ABS light activate on my Volkswagen Crafter 2?
We will now move on to the section where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Volkswagen Crafter 2?. The solutions will rely upon the deficiencies you are encountering. To begin with, pass your Volkswagen Crafter 2 to the diagnostic tool, if you don’t know how to read a fault code on Volkswagen Crafter 2, don’t be reluctant to browse our article which points out the steps to take. Once you have discovered the cause of your trouble, here are the steps to take to fix it and turn off the ABS light on your Volkswagen Crafter 2:
- Problem of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical trouble: Once you’ve identified an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A faulty sensor: Sometimes a simple cleaning of the sensors will be enough to get rid of the trouble, in any other case changing a sensor can cost up to a few hundred euros.
To get more tips on the Volkswagen Crafter 2, take a look at the Volkswagen Crafter 2 category.
