Keeping an eye on your car is essential nowadays, in fact, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you strongly risk to see your car getting in bad conditions. This is specifically the theme we are gonna discuss in this article, one of the symptoms that most perturbs car owners is the ABS warning light on Peugeot Boxer 2. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Peugeot Boxer 2?.

abs-light-stays-on-peugeot-boxer-2

What does the ABS light on Peugeot Boxer 2 indicate?

We will begin our paper with the meaning of an ABS warning light on Peugeot Boxer 2, for this, in first, we will see what an ABS is, and afterwards, why the ABS light on your car lights up.

What is the ABS on Peugeot Boxer 2?

First of all, it is fundamental to explain to you what the ABS of your Peugeot Boxer 2 is employed for so that you can understand the remaining of this article. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The goal of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Peugeot Boxer 2 is consisting of several components, here they are:

  • Speed sensors on each wheel, which will examine if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Peugeot Boxer 2

.
In truth, you can quite easily come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS allows, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Peugeot Boxer 2

Now we move on to the part that you are most certainly more enthusiastic about, meaning of an ABS warning light on a Peugeot Boxer 2? First of all, it is an orange light, so if it is on it denotes that your ABS system is faulty. You should be advised that whenever the ABS warning light is on, the ABS will be put into safety mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Peugeot Boxer 2 can alert:

  • It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A failure of one of them motives the ABS light on your Peugeot Boxer 2 to turn on
  • The ABS hydraulic block of your Peugeot Boxer 2: If it is faulty it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to run your ABS, the light will undoubtedly turn on.

What if the ABS light turns on on my Peugeot Boxer 2?

We will now move on to the part where we will try to give you some solutions to switch off this light, and thus answer the following question, what to do if the ABS light is on on my Peugeot Boxer 2?. The solutions will be contingent on the deficiencies you are going through. First of all, pass your Peugeot Boxer 2 to the diagnostic tool, if you don’t know how to read a fault code on Peugeot Boxer 2, don’t hesitate to read our article which details the steps to take. Once you have determined the origin of your issue, here are the steps to take to correct it and turn off the ABS light on your Peugeot Boxer 2:

  • Issue of the ECU or the hydraulic block: It can only be altered, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical issue: Once you’ve spotted an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A faulty sensor: In some cases a simple cleaning of the sensors will be enough to get rid of the issue, otherwise changing a sensor can cost up to a few hundred euros.

If you need more tutorials on the Peugeot Boxer 2, go to our Peugeot Boxer 2 category.