Watching your automobile is imperative in these modern times, in truth, if you do not do the minimum service of it, or if you do not take into account signals of abnormality, you highly risk to see your car getting in bad conditions. This is specifically the subject we are gonna discuss today, one of the symptoms that most perturbs car owners is the ABS warning light on Mercedes Classe C 2. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Mercedes Classe C 2?.

abs-light-stays-on-mercedes-classe-c-2

What does the ABS light on Mercedes Classe C 2 signify?

We will commence our content page with the definition of an ABS warning light on Mercedes Classe C 2, for this, in first, we will discover what an ABS is, and soon after, why the ABS light on your car lights up.

What is the ABS on Mercedes Classe C 2?

To start with, it is fundamental to explain to you what the ABS of your Mercedes Classe C 2 is used for so that you can understand the rest of this content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The aim of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Mercedes Classe C 2 is made from several parts, here they are:

  • Speed sensors on each wheel, which will examine if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Mercedes Classe C 2

.
In fact, you can simply feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the actions that ABS permits, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Mercedes Classe C 2

Now we go forward to the part that you are almost certainly more enthusiastic about, meaning of an ABS warning light on a Mercedes Classe C 2? Firstly, it is an orange light, so if it is on it means that your ABS system is defective. You should be advised that as soon as the ABS warning light is on, the ABS will be put into safety mode, so you should adapt your driving and not take any risks. Here are the different problems that the ABS warning light on your Mercedes Classe C 2 can point:

  • It could be a simple short circuit, a broken wiring harness, a defective relay or fuse. Use a pressure gauge to verify it.
  • A malfunctioning ABS sensor: A malfunction of one of them motives the ABS light on your Mercedes Classe C 2 to turn on
  • The ABS hydraulic block of your Mercedes Classe C 2: If it is defective it is possible that the indicator light will occur and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a problem, being the center of all decisions made to operate your ABS, the light will inevitably turn on.

What if the ABS light activate on my Mercedes Classe C 2?

We will now go forward to the part where we will try to give you some answers to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Mercedes Classe C 2?. The answers will rely upon the failure you are having. Firstly, pass your Mercedes Classe C 2 to the diagnostic tool, if you don’t know how to read a fault code on Mercedes Classe C 2, don’t think twice to examine our content which points out the steps to take. Once you have established the origin of your trouble, here are the steps to take to solve it and turn off the ABS light on your Mercedes Classe C 2:

  • Issue of the ECU or the hydraulic block: It can only be altered, and in this case, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
  • Electrical trouble: Once you’ve identified an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
  • A defective sensor: Often a simple cleaning of the sensors will be enough to fix the trouble, in any other case changing a sensor can cost up to a few hundred euros.

In the event that you have any additional questions about the Mercedes Classe C 2, do not hesitate to consult our Mercedes Classe C 2 category.