Paying attention to your car is important in these days, indeed, if you do not do the minimum maintenance of it, or if you do not take into account symptoms of abnormality, you highly risk to see your car getting in bad conditions. This is specifically the subject we are gonna focus on on this webpage, one of the signs that most perturbs drivers is the ABS warning light on hyundai i10. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on hyundai i10?.
What does the ABS light on hyundai i10 indicate?
We will start our content page with the definition of an ABS warning light on hyundai i10, for this, in first, we will see what an ABS is, and next, why the ABS light on your car lights up.
What is the ABS on hyundai i10?
First of all, it is fundamental to demonstrate to you what the ABS of your hyundai i10 is intended for so that you can understand the rest of this article. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The objective of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your hyundai i10 is consisting of different components, here they are:
- Speed sensors on each wheel, which will review if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your hyundai i10
The fact is, you can quite easily come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS allows, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on hyundai i10
Now we move on to the part that you are probably more keen on, meaning of an ABS warning light on a hyundai i10? To begin with, it is an orange light, so if it is on it suggest that your ABS system is faulty. You should be informed that whenever the ABS warning light is on, the ABS will be put into safety mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your hyundai i10 can signal:
- It could be a simple short circuit, a damaged wiring harness, a faulty relay or fuse. Use a pressure gauge to verify it.
- A malfunctioning ABS sensor: A failure of one of them causes the ABS light on your hyundai i10 to come on
- The ABS hydraulic block of your hyundai i10: If it is faulty it is possible that the indicator light will come on and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a problem, being the center of all decisions made to operate your ABS, the light will undoubtedly come on.
What if the ABS light activate on my hyundai i10?
We will now move on to the part where we will try to give you some solutions to shut off this light, and thus answer the following question, what to do if the ABS light is on on my hyundai i10?. The solutions will rely upon the failures you are experiencing. To begin with, pass your hyundai i10 to the diagnostic tool, if you don’t know how to read a fault code on hyundai i10, don’t think twice to examine our article which points out the steps to take. Once you have located the origin of your problem, here are the steps to take to resolve it and turn off the ABS light on your hyundai i10:
- Issue of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical problem: Once you’ve noticed an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
- A faulty sensor: Occasionally a simple cleaning of the sensors will be enough to fix the problem, otherwise changing a sensor can cost up to a few hundred euros.
In the event that you have any additional questions about the hyundai i10, do not hesitate to consult our hyundai i10 category.