Paying attention to your car is very important in these modern times, in reality, if you do not do the minimum routine service of it, or if you do not take into account symptoms of abnormality, you highly risk to see your car getting in bad conditions. This is exactly the topic we are gonna focus on today, one of the indicators that most disturbs car owners is the ABS warning light on Fiat Doblo 2. In an attempt to help you analyze this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Fiat Doblo 2?.

abs-light-stays-on-fiat-doblo-2

What does the ABS light on Fiat Doblo 2 signify?

We will start our content page with the definition of an ABS warning light on Fiat Doblo 2, to do this, in first, we will discover what an ABS is, and next, why the ABS light on your car lights up.

What is the ABS on Fiat Doblo 2?

First of all, it is necessary to demonstrate to you what the ABS of your Fiat Doblo 2 is utilized for so that you can understand the rest of this article content. The ABS (Anti-lock Braking System) is a system that prevents the wheels of your car from locking during braking. The purpose of this system is to optimize the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Fiat Doblo 2 is made up of several parts, here they are:

  • Speed sensors on each wheel, which will analyze if one of the wheels locks up.
  • A hydraulic system and valves that will manage the pressure of the pads on the discs to manage the braking power of the car
  • A computer that is the control center of your entire ABS system as well as the ABS light of your Fiat Doblo 2

.
The fact is, you can simply feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the actions that ABS allows, it will optimise braking to the maximum by associating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.

Meaning of an ABS light on Fiat Doblo 2

Now we go forward to the part that you are probably more enthusiastic about, meaning of an ABS warning light on a Fiat Doblo 2? First of all, it is an orange light, so if it is on it shows that your ABS system is faulty. You should be advised that when the ABS warning light is on, the ABS will be put into security mode, so you should modify your driving and not take any risks. Here are the different problems that the ABS warning light on your Fiat Doblo 2 can show:

  • It could be a simple short circuit, a broken wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
  • A malfunctioning ABS sensor: A malfunction of one of them causes the ABS light on your Fiat Doblo 2 to turn on
  • The ABS hydraulic block of your Fiat Doblo 2: If it is faulty it is possible that the indicator light will turn on and you will no longer be able to use your ABS.
  • The ABS computer: If the computer has a trouble, being the center of all decisions made to operate your ABS, the light will undoubtedly turn on.

What if the ABS light turns on on my Fiat Doblo 2?

We will now go forward to the part where we will try to give you some solutions to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Fiat Doblo 2?. The solutions will be contingent on the failures you are experiencing. First of all, pass your Fiat Doblo 2 to the diagnostic tool, if you don’t know how to read a fault code on Fiat Doblo 2, don’t think twice to read our article content which explains the steps to take. Once you have identified the cause of your problem, here are the steps to take to solve it and turn off the ABS light on your Fiat Doblo 2:

  • Problem of the ECU or the hydraulic block: It can only be adjusted, and in this case, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
  • Electrical problem: Once you’ve identified an electrical problem with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, otherwise you’ll have to repair the wiring harness.
  • A faulty sensor: In some cases a simple cleaning of the sensors will be enough to resolve the problem, otherwise changing a sensor can cost up to a few hundred euros.

To find more tips on the Fiat Doblo 2, take a look at the Fiat Doblo 2 category.