Having a problem with your motor vehicle is traditional, because regrettably recent automobiles are more and more difficult and therefore at the mercy of more and more possible breakdowns. In this article we’re going to try to help you to resolve an injection problem on your Peugeot Expert Tepee . This is a problem that is specially frustrating because it can ultimately bring your vehicle to non starting or damaged engine unit. To achieve this, first we will find out how injection works, then, what are the different problems that can exist on a Peugeot Expert Tepee injectors , and at last, how to resolve them.

injection-problem-peugeot-expert-tepee

What is the aim of the injection of a Peugeot Expert Tepee?

So we start our article by quickly detailing how an injection system works so that you have all the information you need to understand the failure associated with it. < br>
The injection system of a Peugeot Expert Tepee manages the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be far more precise and to come, under pressure, to launch the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Peugeot Expert Tepee. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and therefore a better combustion.

What are the different injection complications on Peugeot Expert Tepee?

Now in this second component, we are going to discover the different injection complications and their manifestations that you might face on your Peugeot Expert Tepee .

Injection pump complications Peugeot Expert Tepee

To start, we will find out the injection pump complications on your Peugeot Expert Tepee, there are not many of them, they are often chronic but we will highlight them below:

  • Electronic problem of the high pressure pump: If you have an electronic problem, the pressure in your injection system may be too high or too low which will bring about a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine unit of your Peugeot Expert Tepee.
  • Leakage from the injection pump of your Peugeot Expert Tepee: If you have a major leakage problem, the result will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good

.
Regarding the results and manifestations of a fuel pump problem on a Peugeot Expert Tepee , you will most certainly experience, a lack of power, your engine unit grazing, dark smoke emissions…

Injectors complications Peugeot Expert Tepee

Now we proceed to the injector problems on Peugeot Expert Tepee . Injectors represent the end of your injection system, here are the different complications you might encounter:

  • Dirty Peugeot Expert Tepee injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are totally clogged. So you will potentially have one or more cylinders that are not working effectively.
  • Leaky Peugeot Expert Tepee injector: It’s often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Peugeot Expert Tepee HS: This is the case when your injectors are totally clogged or when you have an electronic problem, it will not let anything go.

Concerning the symptoms of injector complications on your Peugeot Expert Tepee it is about the same as for a defective injection pump. You might experience problems with starting, throttle response, power loss, and smoke emission.

How to fix an injection problem on a Peugeot Expert Tepee?

To finish our content page on the injection complications on Peugeot Expert Tepee , we will try to give you the solutions that exist to resolve these complications.
If after a precise diagnosis it’s your injection pump that is the source of your complications, it will regrettably be very complicated to intervene on the trouble without changing the component, this change often goes with the replacement of the injectors, and sometimes the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Regarding a problem with an injector there are various solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Peugeot Expert Tepee, do not think twice to seek advice from our article on this subject to get the process. If it doesn’t work, you will have to replace them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to replace it, do not think twice to seek advice from our article on the injectors that leak on Peugeot Expert Tepee, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is broken or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.

If you need more tutorials on the Peugeot Expert Tepee, go to our Peugeot Expert Tepee category.