Having a issue with your motor vehicle is basic, because regrettably recent automobiles are more and more difficult and consequently at the mercy of more and more possible breakdowns. Today we’re going to try to help you to solve an injection problem on your Mitsubishi L200 . This is a issue that is specially bothersome because it can sooner or later bring your vehicle to non starting or broken engine. To achieve this, first we will see how injection functions, then, what are the different concerns that can exist on a Mitsubishi L200 injectors , and at last, how to solve them.

injection-problem-mitsubishi-l200

What is the purpose of the injection of a Mitsubishi L200?

So we start our content by quickly explaining how an injection system functions so that you have all the information you need to understand the failures affiliated with it. < br>
The injection system of a Mitsubishi L200 handles the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be far more precise and to come, under pressure, to release the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will release the fuel in the form of micro-drops into the cylinders of your Mitsubishi L200. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and consequently a better combustion.

What are the different injection complications on Mitsubishi L200?

Now in this second part, we are going to explore the different injection complications and their manifestations that you may possibly encounter on your Mitsubishi L200 .

Injection pump complications Mitsubishi L200

To start, we will see the injection pump complications on your Mitsubishi L200, there are not many of them, they are generally frequent but we will detail them down below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will cause a bad air/fuel mixture and consequently a bad combustion and thus alter the behavior of the engine of your Mitsubishi L200.
  • Leakage from the injection pump of your Mitsubishi L200: If you have a major leakage problem, the consequence will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good

.
Regarding the results and manifestations of a fuel pump issue on a Mitsubishi L200 , you will most certainly feel, a lack of power, your engine grazing, dark smoke emissions…

Injectors complications Mitsubishi L200

Now we move on to the injector problems on Mitsubishi L200 . Injectors represent the end of your injection system, here are the different complications you may possibly encounter:

  • Dirty Mitsubishi L200 injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are completely clogged. So you will possibly have one or more cylinders that are not working effectively.
  • Leaky Mitsubishi L200 injector: It’s generally at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Mitsubishi L200 HS: This is the case when your injectors are completely clogged or when you have an electronic problem, it will not let anything go.

Regarding the signs of illness of injector complications on your Mitsubishi L200 it is about the same as for a faulty injection pump. You may possibly encounter problems with starting, throttle response, power loss, and smoke emission.

How to resolve an injection issue on a Mitsubishi L200?

To finish our article on the injection complications on Mitsubishi L200 , we will try to give you the solutions that exist to solve these complications.
If after a precise analysis it’s your injection pump that is the cause of your complications, it will regrettably be very complicated to intervene on the issue without replacing the part, this change generally goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are different solutions depending on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Mitsubishi L200, do not hesitate to seek advice from our content on this subject to get the procedure. If it doesn’t work, you will have to change them.
  • Leaky injector: The change and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to change it, do not hesitate to seek advice from our content on the injectors that leak on Mitsubishi L200, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, generally speaking, the replacement of an injector costs around 500 euros labor included.

In the event that you have any additional questions about the Mitsubishi L200, do not hesitate to consult our Mitsubishi L200 category.