Whether you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your automobile to blame – your low beams. Despite the fact this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this ordinary manipulation, and in this content page, we will find out how to adjust the low beam lights of your Bmw Serie 5? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Bmw Serie 5.
Why set the low beam lights of your Bmw Serie 5?
So let’s commence our content page with the benefit of adjusting the low beam lights of your Bmw Serie 5. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not constantly the case and verifying this setting, either because the low beams of your Bmw Serie 5 are not lighting up well, or because you have the feeling that they are too low or too powerful is a good idea .
Adjusting the low beam of your Bmw Serie 5 for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Bmw Serie 5 must be done for a basic safety reason. Regardless whether it’s for you, or for the other drivers you encounter during your night trips. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Bmw Serie 5 for legal motives
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Bmw Serie 5?
We will now go forward to the section that interests you the most in this content page, how to adjust the low beams of his Bmw Serie 5? This setting may appear to be a bit difficult, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Bmw Serie 5
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Bmw Serie 5
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Bmw Serie 5 (they are almost always marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Bmw Serie 5 is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Bmw Serie 5, please examine our content page on this subject.
To find more tips on the Bmw Serie 5, take a look at the Bmw Serie 5 category.
