If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle guilty – your headlights, also often known as high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this article, we are going to find out how to adjust the headlights of your Mitsubishi Space star 2? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Mitsubishi Space star 2.
Why adjust the headlights of your Mitsubishi Space star 2?
So let’s begin our content with the interest of adjusting the headlights of your Mitsubishi Space star 2. For most people, our headlights are adjusted good enough, and they appear to light up enough through the night. Sadly this is not always the circumstance and checking this setting, either because the headlights on your Mitsubishi Space star 2 are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Mitsubishi Space star 2 for safety
First of all, the headlight adjustment of a Mitsubishi Space star 2 must be made for a basic safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In fact, if you don’t see enough, the risk is to miss out an obstacle on the road, or to predict a curve badly. On the other hand, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a car, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Mitsubishi Space star 2 . It is consequently essential for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Mitsubishi Space star 2 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be matching to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Mitsubishi Space star 2?
We will now move on to the part that concerns you the most in this article, how to adjust the headlights of his Mitsubishi Space star 2? This setting may appear a bit difficult, but by simply following the instructions you should have the ability to accomplish it without too much trouble.
Preparations to adjust the headlights of a Mitsubishi Space star 2
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Mitsubishi Space star 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Mitsubishi Space star 2 (they are generally marked, and those on top must modify the verticality and the one on the side controls the horizontality of the adjustment).
- Use a cloth or different things to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Mitsubishi Space star 2 is coherent, do not think twice to verify it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Mitsubishi Space star 2, please read our content on this subject matter.
In the event that you have any further questions about the Mitsubishi Space star 2, do not hesitate to consult our Mitsubishi Space star 2 category.
