Whether you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle responsible – your headlights, also known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this simple manipulation, and in this post, we are going to find out how to adjust the headlights of your Nissan Micra 4? To achieve this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Nissan Micra 4.

adjust-headlights-nissan-micra-4

Why adjust the headlights of your Nissan Micra 4?

So let’s start our content page with the benefit of adjusting the headlights of your Nissan Micra 4. For most people, our headlights are adjusted well enough, and they appear to light up enough during the night. Regrettably this is not constantly the case and looking at this setting, either because the headlights on your Nissan Micra 4 are not bright enough, or because you have the feeling that they are too weak is a wise decision .

Adjusting the high beams of your Nissan Micra 4 for safety

First of all, the headlight adjustment of a Nissan Micra 4 must be carried out for a simple security explanation. Regardless it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to fail to see an obstacle driving, or to anticipate a curve badly. Alternatively, if your headlights are too powerful, even if you are meant to switch to low beam lights when you pass a car, the time required to make this switch will generally expose the driver in front of you to the headlight beam of your Nissan Micra 4 . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.

Adjusting the headlights of a Nissan Micra 4 for legal reasons

In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.

How to adjust the headlights of a Nissan Micra 4?

We will now proceed to the section that concerns you the most in this post, how to adjust the headlights of his Nissan Micra 4? This setting may appear a bit complex, but by simply following the instructions you should have the ability to accomplish it without too much trouble.

Preparations to adjust the headlights of a Nissan Micra 4

First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure attentively.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unnecessary weight from the car, only one person should be in the driver’s seat.

The headlight adjustment of his Nissan Micra 4

Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:

  • Open your hood, identify the screws for horizontal and vertical adjustment of the headlights of your Nissan Micra 4 (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
  • Use a cloth or different things to hide the projector on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, check that the headlights setting of your Nissan Micra 4 is coherent, do not think twice to check it after you have driven it, in some cases it may move.

.
If you want to adjust the fog lights on your Nissan Micra 4, please browse our content page on this subject matter.

If you need more tutorials on the Nissan Micra 4, go to our Nissan Micra 4 category.