You’re sick and tired of listening to cassettes and only having the ability to listent to the radio, while your phone is filled with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s specifically why we’ve posted this article content to help you, because now you’re going to learn about how to install a car radio on your Chevrolet Equinox. To accomplish this, first we will find out how to remove the old car radio, then how to install a car radio on Chevrolet Equinox and to finish, how to connect it.
How to install car radio on Chevrolet Equinox: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Chevrolet Equinox, there is one necessary task, remove the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two options dependent on the stereo that equips your Chevrolet Equinox:
- Original car radio:
In this instance, you’ll have to be patient, most of the time, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Chevrolet Equinox. Indeed, you will need to remove certain parts of the centre console to access the car radio itself. To achieve this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this scenario the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Chevrolet Equinox: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Chevrolet Equinox. Ahead of time, take the time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various steps required in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Chevrolet Equinox, once positioned, remember to press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Chevrolet Equinox, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Chevrolet Equinox, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
In the event that you have any additional questions about the Chevrolet Equinox, do not hesitate to consult our Chevrolet Equinox category.
