Regardless whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always effective is extremely important. In fact, bulbs are wearing parts that will surely burn out over the years and consequently need to be changed. You’re quite likely on this website because one of your parking lights is burnt out and you’re wondering how to change your Nissan Maxima’s license plate bulb, we’ve written this article to help you do it on your own and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Nissan Maxima.
How to swap the license plate bulb on your Nissan Maxima coming from the outside
This method is the most simple of the two, in reality, for this one you will just need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this article content to show you the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Nissan Maxima. Regardless whether it’s the front or the back of your car the process will be identical.
Here are a few simple guidelines to stick to to carry out this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Nissan Maxima
- Use your screwdriver or knife to remove the bulb from its placement, if you are scared of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to confirm the success of the operation.
.
How to replace the number plate bulb on your Nissan Maxima without outside access
Second section of our content, swap this license plate bulb on your Nissan Maxima without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Nissan Maxima
To swap the one on the front plate, nothing could be simpler, you will have to put yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to put in too much pressure otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Nissan Maxima
Finally last possibility, you must swap the bulb on the backplate of your Nissan Maxima, but you simply cannot open the cover from the outside of your car. In this case, here is the technique to accomplish this task:
- Disconnect the battery from your Nissan Maxima
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Nissan Maxima, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main methods for replacing license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Nissan Maxima. If you want to change other bulbs like the position light bulbs on your Nissan Maxima or the low beam bulbs on Nissan Maxima, don’t hesitate to browse our articles which describe you the operation to follow.
If perhaps you have any further questions about the Nissan Maxima, do not hesitate to consult our Nissan Maxima category.
