Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your car at fault – your headlights, also identified as high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this article, we are going to discover how to adjust the headlights of your Toyota Sequoia? To achieve this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Toyota Sequoia.
Why adjust the headlights of your Toyota Sequoia?
So let’s start our article with the interest of adjusting the headlights of your Toyota Sequoia. For most of us, our headlights are adjusted well enough, and they seem to light up enough after dark. Unfortunately this is not always the circumstance and examining this setting, either because the headlights on your Toyota Sequoia are not bright enough, or because you have the sensation that they are too weak is a wise decision .
Adjusting the high beams of your Toyota Sequoia for safety
To begin with, the headlight adjustment of a Toyota Sequoia must be conducted for a simple safety reason. Regardless it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss an obstacle driving, or to predict a curve badly. On the other hand, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you cross a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Toyota Sequoia . It is therefore important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Toyota Sequoia for legal reasons
Furthermore to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Toyota Sequoia?
We will now move on to the part that interests you the most in this article, how to adjust the headlights of his Toyota Sequoia? This adjustment may seem a bit complicated, but by following the guidance you should be able to accomplish it without too much concern.
Preparations to adjust the headlights of a Toyota Sequoia
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Toyota Sequoia
Once your car is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to stick to:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Toyota Sequoia (they are usually designated, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Toyota Sequoia is logical, do not hesitate to check it after you have driven it, in some cases it may move.
.
.
If you want to adjust the fog lights on your Toyota Sequoia, please browse our article on this subject matter.
To get more tips on the Toyota Sequoia, take a look at the Toyota Sequoia category.
