Although newer cars are getting better and better insulated, they are still get pretty hot throughout summer. One of the simplest methods to fairly quickly dissipate this heat throughout summer, or help you get rid of the mist in the winter, is to open your windows when you drive. However, often your windows may not open or may get stuck open or close . In this case, what should I do if I have a window stuck on my Ford S-max 2? This is exactly what we will try to answer in this article, first we will find out the case of a manual window stuck on Ford S-max 2, and secondly the case of a power window.

window-stuck-ford-s-max-2

Manual window stuck on Ford S-max 2

The mechanisms between a power window and a manual window are different, nevertheless, if the window of your Ford S-max 2 is stuck in the open or closed position , it will not change much on the technical side, but in the open position it is necessarily more irritating, you risk to have your vehicle stolen, or to suffer from bad weather and that the inside of your Ford S-max 2 moulds or has electrical complications because of humidity.

Why is the manual window of my Ford S-max 2 stuck?

If you are in the case where the manual window of your Ford S-max 2 is stuck in either the open or closed position, there are two most important motives that can explain this blockage:

  • The window regulator cable is tangled or damaged: This will prevent the mechanism from raising or lowering the window.
  • Seals or glass guides are damaged: They prevent the glass from moving up and down correctly.

How to open the stuck manual window on my Ford S-max 2?

Now we have discovered why the manual window of your Ford S-max 2 is locked in the open or closed position. We will now discuss the solutions available to you so that you can unblock the window of your Ford S-max 2 . To do this, you don’t need very advanced mechanical expertise, the manual mechanisms are quite very easy. You will have to take out the seal from your door to access the window lifter mechanism. With a visual check, you will fairly quickly identify if some elements are injured like the window supports or a lever arm, if the cable is tangled or if the rails are damaged, which will block the window of your Ford S-max 2. If it’s just the rails you can try to put them back in web site and lubricate it, in any other case you will have to replace the part, for that you will have to first take out the glass carefully to access the mechanisms to be repalced carefully.

Electric window stuck on Ford S-max 2

Now let’s proceed to the most general case, a power window blocked on Ford S-max 2 . In actual fact, electric windows are necessarily more complex than manual windows and therefore necessarily bring their share of additional complications.

Why is the power window on my Ford S-max 2 stuck?

So let’s start with the possible roots of a window blocked on Ford S-max 2:

  • Defective window winder motors: In actual fact, it’s one of the most common factors for window winder failure, as these motors tire over time and can be rendered useless. In general you can find out this because before they resign totally, they start to tire and the window rises less and less fairly quickly.
  • One of the gears of the window lift system seizes or breaks, in such a case you should notice a particular noise when you press the window lift button.
  • As with the manual window lifter, one of the cables may break or get tangled in the drum of the mechanism, likewise you should notice a noise when activating the window of your Ford S-max 2
  • .

  • The window lift fuse is defective, so no power supply to the window lift motor of your Ford S-max 2
  • .

  • The switch knob is unplugged or faulty

How do I unlock the stuck power window on my Ford S-max 2?

Now that we have discovered all the possible causes of a window blocked on Ford S-max 2, it’s time to help you fix this trouble, on this website are the different techniques you will be able to put in web site to unblock the window of your Ford S-max 2:

  • Before you do anything else, carefully take out your door trim to avoid breaking the staples holding it in web site.
  • Once in front of the mechanism, you need to test the electrical installation, disconnect the power cables from the motor and using a voltmeter check that you have a current of around 12 volts when pressing the window lift button. If this is not the case, you will have to look at the window lift fuse on your Ford S-max 2, please refer to our article to help you find it. If your fuse is in good state verify your power supply wires, one of them must be cut
  • .

  • If it is the cable that is tangled, you can try yourself by removing the glass from its brackets to put it back in web site, in any other case it will have to be changed.
  • Regarding the engine unit, a basic original replacement will be the best solution, obviously a dead engine unit is not recoverable.
  • If it is one of the window supports that is broken on your Ford S-max 2, you can easily change them because they are simply clipped or screwed on your window.
  • Finally, if nothing comes about when you activate the switch knob and you have checked out all your electrical connections, remove the switch knob to find out if it is properly connected or if it is not damaged.

There, you now know how to get rid of a window stuck on Ford S-max 2/strong, some repairs are more complex than others, if you don’t experience able to do them yourself, go to your auto technician who will be able to do them for you.

Whenever you have any additional questions about the Ford S-max 2, do not hesitate to consult our Ford S-max 2 category.