If you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these cases, there’s only one component of your car to blame – your headlights, as well named high beams. Nevertheless this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this basic manipulation, and in this article, we are going to discover how to adjust the headlights of your Ford S-max 2? To do this, first we will discover why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford S-max 2.
Why adjust the headlights of your Ford S-max 2?
So let’s start our article with the interest of adjusting the headlights of your Ford S-max 2. For many of us, our headlights are adjusted well enough, and they appear to light up enough during the night. However this is not constantly the case and checking this setting, either because the headlights on your Ford S-max 2 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Ford S-max 2 for safety
To begin with, the headlight adjustment of a Ford S-max 2 must be achieved for a basic safety motive. Whether it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the risk is to ignore an obstacle on the road, or to predict a curve badly. However, if your headlights are too powerful, even if you are supposed to switch to low beam lights when you pass a car, the time required to make this change will generally expose the driver in front of you to the headlight beam of your Ford S-max 2 . It is consequently important for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ford S-max 2 for legal reasons
In addition to safety, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford S-max 2?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Ford S-max 2? This adjustment may seem a bit complicated, but by following the instructions you should be able to accomplish it without too much trouble.
Preparations to adjust the headlights of a Ford S-max 2
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to set up:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The headlight adjustment of his Ford S-max 2
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are horizontal. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, find the screws for horizontal and vertical adjustment of the headlights of your Ford S-max 2 (they are in most cases designated, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Ford S-max 2 is logical, do not think twice to check it after you have driven it, oftentimes it may move.
.
.
If you want to adjust the fog lights on your Ford S-max 2, please browse our article on this subject.
To get more tips on the Ford S-max 2, take a look at the Ford S-max 2 category.
