Today we’re going to deal with one more subject in the series on motor vehicle care. This is the coolant level, and specifically where to put coolant in Fiat 500? To do this, we will begin this article content with a little reminder on the interest of making sure of the coolant level of your motor vehicle, then, where to fill coolant in Fiat 500? And, at last, how to make the level of this famous liquid.

put-coolant-fiat-500

Why to fill coolant level on a Fiat 500?

Before we explain where the coolant is on a Fiat 500, we begin our content by reminding you what is the interest of guaranteeing an ideal coolant level ? The coolant of a Fiat 500 has a vital action in the good performing of your engine, the fact is, it will circulate in it to capture the heat generated by its process and transfer it to your radiator which has the objective to make it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not effective. Without coolant your engine would overheat after only a few minutes, and this would result in engine failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops down below the lowest level, the circulation of the coolant in the cooling system may be bothered and therefore its effectiveness may be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and cause a leak that can also cause the engine to break down.

Where to put the coolant in Fiat 500?

We now move on to the step that you are most likely most enthusiastic about, where to put coolant in Fiat 500? You are now conscious of the importance of constantly having the ideal level of this coolant. To find it is very basic, here are the different steps to allow you to find the expansion tank that contains the coolant of your Fiat 500:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your motor vehicle.
  • You must quickly find the expansion tank that contains the coolant of your Fiat 500, it is generally based in one of the 4 corners of your engine block, to find it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Fiat 500?

Now that you have identify where the coolant is in your Fiat 500 , we will explain how to make the level of it. Nothing could be less complicated, just follow the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Check on the side of the expansion tank of your Fiat 500 the level of the expansion tank. Just check out if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to follow these steps, in any other case the level of your liquid is enough

    • .

  • After waiting for the engine to cool down, you can open the coolant cap of your motor vehicle.
  • Softly add coolant to the expansion tank of your Fiat 500 by checking regularly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine, and with a syringe, remove the excess coolant.

If the engine of your Fiat 500 warms up despite a level coolant, browse this content, you will have the ability to find the causes of this problem.

If you need more guides on the Fiat 500, go to our Fiat 500 category.