When your car is running normally everything is fine, nevertheless if it starts to have regular problems you might begin to speculate, specifically if your motor vehicle won’t start. In this article we will learn you where the starter of a Volvo XC90 is, it will help you to resolve your ignition problems. To get this done, we will first illustrate the purpose of a starter, then, where is the starter on a Volvo XC90 , and, at last, how to change the starter of a motor vehicle.
Role of the starter on your Volvo XC90
We begin this content by explaining the purpose of the starter motor on your Volvo XC90. The starter is an electric motor which is powered by your battery, its purpose will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is built from three most important parts:
- The Solenoid: This component is an electrical relay that will work as a switch, it will be activated by the key of your Volvo XC90 and let the current from your battery to the engine unit of your alternator.
- The engagement pinion: This is the last component of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it allows to transmit the force from the starter to the engine.
The engine unit: Main element of your alternator, it is the one that will drive the flywheel of your Volvo XC90 and generate enough speed for your engine unit to begin.
Where is the starter on a Volvo XC90?
Now that we have quickly explained what a starter is and how it works, we will answer the question that most of you have to ask yourselves where is the starter located on a Volvo XC90? It is quite easy to discover a starter, obviously, it is a large component that will almost always be positioned in a similar place. We let you see the two possible spots for your motor vehicle starter down below.
Location of the starter on traditional Volvo XC90
First and most common circumstance, where to discover the starter of a Volvo XC90 with a conventional motor (implied without start and stop). The starter has a particular function, to start the engine unit of your motor vehicle, for that, it must always be near the engine unit flywheel of this one because it is the component that it actuates when it is used. The flywheel is located at the junction between your gearbox and your engine unit.
Location of the starter to Volvo XC90 with start and stop
And now second possible starter location of your Volvo XC90 . This case is much less frequent. It only relates to engines fitted with start and stop, and a good component of them will be equipped with a starter positioned close to the flywheel. However, on some particular series or engines, the starter of your Volvo XC90 might be integrated in your alternator, it is then named a starter-alternator, to discover it nothing easier, find your accessory belt and you should see the big starter block.
How to change the starter on a Volvo XC90?
Finally, we’ll describe to you actually quite quickly how to change the starter of a Volvo XC90. This process is not actually complex, it can be considered by people who have a minimum of simple mechanical experience and adapted equipment. Adhere to down below the most important steps to carry out this intervention:
- Disconnect the battery on your Volvo XC90, if you don’t know how to do it, don’t hesitate to consult our content which points out how to do it without taking any risk.
- After discovering your starter, loosen the fasteners that hold it in your engine unit block, there will usually be 2 or 3
- It will be time to disconnect the power cables from the starter motor of your Volvo XC90, nevertheless before doing so we suggest you to take a picture of the installation to avoid making a mistake when reassembling.
- It’s possible that to remove it you might need to remove auto parts like the gimbal.
- Remount the new starter, being careful when connecting the connectors.
- Reconnect your battery and test your starter.
.
If you need more guides on the Volvo XC90, go to our Volvo XC90 category.
