If you’re a bit of a handy person, you’re almost certainly eager to take care of most of the maintenance to be done on your Land Rover Range Rover Evoque, but some are more complex than others and need the removal of body parts or elements to access the component you want to work on. We would like to help you in this task. That’s why today we are going to view how to remove the bumper from a Land Rover Range Rover Evoque. This operation is not very complex and you should be able to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Land Rover Range Rover Evoque, then how to remove the rear bumper of this one.
How to remove the front bumper from a Land Rover Range Rover Evoque
So let’s commence our content page with the front bumper of your Land Rover Range Rover Evoque. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to in order to disassemble the bumper of your Land Rover Range Rover Evoque in good conditions:
- If you want to be more relaxed, we recommend you to put your Land Rover Range Rover Evoque on stands and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also known as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Land Rover Range Rover Evoque. Dependant on your motor vehicle features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Land Rover Range Rover Evoque on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go under your Land Rover Range Rover Evoque to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of working with a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Land Rover Range Rover Evoque, to put it back in place stick to the steps in the opposite direction.
How to remove the rear bumper from a Land Rover Range Rover Evoque
And to conclude, whether or not the process is quite equivalent, we will check out the case of removing the rear bumper from your Land Rover Range Rover Evoque. For each stage to avoid repeating ourselves we will only give you the broad outlines, refer to part 1 if you have any doubts or questions for more information.
- Start with executing the same first stage, that is, lift your Land Rover Range Rover Evoque and remove your rear wheels in order to have an ideal working space to remove the bumper of your Land Rover Range Rover Evoque serenely
- Remove the rear wheel arches of your Land Rover Range Rover Evoque to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it much easier to remove the bumper from your Land Rover Range Rover Evoque.
- Take off the lower bindings below your Land Rover Range Rover Evoque.
- Simultaneously, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Land Rover Range Rover Evoque, stick to the same technique as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Land Rover Range Rover Evoque whether it is the front one or the rear one the techniques are almost the same and it is enough to be careful to make everything go well.
If you need more tutorials on the Land Rover Range Rover Evoque, go to our Land Rover Range Rover Evoque category.
