If you’re a bit of a do-it-yourselfer, you’re most certainly wanting to manage the majority of the work to be carried out on your Honda Pilot, but some are more complex than others and necessitate the removal of body parts or elements to access the component you want to focus on. We want to help you in this operation. That’s why on this web page we are going to find out how to remove the bumper from a Honda Pilot. This process is not very complex and you should be able to do it with few equipment. For that, first we will discover how to remove the front bumper of your Honda Pilot, then how to remove the rear bumper of this one.
How to remove the front bumper from a Honda Pilot
So let’s start our document with the front bumper of your Honda Pilot. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to to be able to disassemble the bumper of your Honda Pilot in good conditions:
- If you want to be more comfy, we recommend you to put your Honda Pilot on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your car: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Honda Pilot. According to your automobile features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Honda Pilot on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Honda Pilot to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of working with a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Honda Pilot, to put it back in place adhere to the steps in the opposite direction.
How to remove the rear bumper from a Honda Pilot
And to conclude, even if the operation is quite equivalent, we will look at the case of removing the rear bumper from your Honda Pilot. For each stage to avoid repeating ourselves we will exclusively give you the broad outlines, read the part 1 if you have any concerns or questions for more info.
- Start with performing the same first stage, that is, lift your Honda Pilot and remove your rear wheels to be able to have an ideal working space to remove the bumper of your Honda Pilot without trouble
- Remove the rear wheel arches of your Honda Pilot to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it easier to remove the bumper from your Honda Pilot.
- Remove the lower bindings underneath your Honda Pilot.
- While doing so, remember to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Honda Pilot, adhere to the same method as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Honda Pilot whether it is the front one or the rear one the methods are more or less the same and it is enough to be careful to make everything go well.
To get more tips on the Honda Pilot, take a look at the Honda Pilot category.
