Wanting to fix the small problems to be made to your vehicle is getting more and more basic. In reality, the annual budget assigned to a car is substantial, so seeking to service it on your own seems to be a good options. Regardless it’s to access your fuel pump, change your seat, wash a stain, or exceptionally transport heavy items, some of you are thinking about how to remove the back seat on Hyundai Genesis. We will try in the following paragraphs to tell you the different ways depending on the year and series of your Hyundai Genesis.
How to remove the back seat on Hyundai Genesis with bolt system
Let’s start with the first situation. If you are trying to find a technique to remove the rear seat of your Hyundai Genesis which is mounted only by 4 bolts, the process is probably the simplest. In reality, to achieve this, you just have to unscrew the two nuts at the back of your seat, accessible from your trunk, using a Torx bit. Then unscrew the two nuts at the front of the seat, which are based under the seat at the level of the passenger footwell. This will enable you to entirely free it from its fasteners and take it off.
How to remove the back seat Hyundai Genesis with clip system
Methodology now a bit more difficult because we tend to be wary of ties that are fixed in force, always scared to pull too strongly and destroy one. How do I remove the back seat of my Hyundai Genesis that has a clip system? In general these clips will be based under the seat, you will see them when you lift the seat of the bench. These clips are often composed of a plastic part and a metal iron that clips into it, to release them you will have to press on the plastic part with a screwdriver and pull the metal part. On some series if this approach does not work, in most cases pulling will be enough to release them.
How to remove the rear seat Hyundai Genesis with folding system with bolts only at the front
Finally, the last technique to take off the rear seat of your Hyundai Genesis, some years have a folding seat that is not fixed on the rear part, in such a case, it is the simplest approach you can have to realise. You will just need to tilt the seat to the front and you will have access to the Torx nuts that hold it to the vehicle’s chassis. Once these nuts are unscrewed, you should be able to remove the rear seat of your Hyundai Genesis.
That’s it, now you should have all the info you need to remove the rear seat of your motor vehicle without problem. If you are planning to dismantle other parts like the bumper of your Hyundai Genesis, we have also write some tutorials to help you in these quests.
If perhaps you have any further questions about the Hyundai Genesis, do not hesitate to consult our Hyundai Genesis category.
