Modern cars all come with an astounding number of features, nevertheless, due to your budget or the year of your Volvo XC60, you may not be sufficiently lucky to have them all. On this page we’re going to help you resolve this trouble by detailing how to install parking sensor on my Volvo XC60? Indeed, this option is very helpful, especially if you live in the city and have to park habitually in narrow parking spaces. To help you out, we’ll first view how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Volvo XC60, and to finish, how much does a parking sensor cost?

install-parking-sensors-volvo-xc60

How does parking sensors operate on an Volvo XC60?

So we start with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting option will allow you to know the distance between the back of your Volvo XC60 and an obstacle when you maneuver. It is as a consequence particularly logical for persons who have to maneuver on a regular basis, whose field of vision is mediocre, or whose vehicle size is huge.
In many cases installed as standard, the reverse sensors of a Volvo XC60 integrate a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will rise in strength with the closeness of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Volvo XC60 will enable you for parking, but also for safety and keeping away from pedestrians.

How to install parking sensors on a Volvo XC60?

We now proceed to the part that you are most likely most focused on, installing reverse parking sensors on a Volvo XC60. This section is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Volvo XC60.

How to change a malfunctioning backup sensors on a Volvo XC60

First we’ll see how to change a malfunctioning parking sensor on an Volvo XC60. In the event that your Volvo XC60 has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to let the system to function effectively. Luckily for you this process is very simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Volvo XC60, this step is very intuitive, it is only clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Volvo XC60

    Now we move on to the section you’re most likely most focused on, how to install a reverse sensor set up on a Volvo XC60 that doesn’t have one? As we explained earlier, you’re lucky because a good number of OEMs now deal auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Volvo XC60 for the installation, do not hesitate to consult our content page on this subject matter to discover the method to follow. If you don’t feel like it, you can call a mechanic, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to follow the installation instructions, but we summarize here the main guidelines.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Volvo XC60

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Volvo XC60. There are two options, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation manual which is accessible with some electrical bases.
      • Determine the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Volvo XC60?

        Price of swapping a malfunctioning reversing parking sensor for an Volvo XC60

        The replacement of a destroyed reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Volvo XC60

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high quality set up.

        Price of a parking sensors kit without drilling for a Volvo XC60

        .
        To conclude, for the price of a reversing radar without drilling for your Volvo XC60, no matter what type you select, you will have to spend among 30 and 60 euros.

        To get more tips on the Volvo XC60, take a look at the Volvo XC60 category.